9 open source boards using the AP7361C-33FGE-7

Real designs built with the AP7361C-33FGE-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the AP7361C-33FGE-7

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the AP7361C-33FGE-7 connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT_1 pin is tied to 3.3V on 7 of 7 designs.
  • The NC_2 pin is left unconnected on 7 of 7 designs.
  • The ADJ/NC_3 pin is left unconnected on 7 of 7 designs.
  • The NC_6 pin is left unconnected on 7 of 7 designs.
OUT_1pin 1Connected to: 3.3V 100%
NC_2pin 2Connected to: Not connected 100%
ADJ/NC_3pin 3Connected to: Not connected 100%
GND_4pin 4Connected to: GND 86%
NC_6pin 6Connected to: Not connected 100%
NC_7pin 7Connected to: Not connected 100%
IN_8pin 8Connected to: 5V 86%
GND_9pin 9Connected to: GND 83% · a signal 17%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LEVIA-H7 by piecol, Ossc pro by marqs85, VENDETTAFC by Caped-Crussader and Mini rocket flight controller by AmitBarman99.

The AP7361C-33FGE-7 in open source designs

The gallery holds 9 open source boards using the AP7361C-33FGE-7 from 7 GitHub repositories; a typical one measures about 39.5 × 51 mm and carries around 108 components.

89% use four copper layers or more, and 89% carry an open source license.

The most starred is LEVIA-H7 by piecol.

Microcontrollers on boards using the AP7361C-33FGE-7

AP7361C-33FGE-7: common questions

Where can I find a AP7361C-33FGE-7 reference design?

Each of the 9 boards on this page is a real design using the AP7361C-33FGE-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the AP7361C-33FGE-7 OUT_1 pin connected?

The OUT_1 pin is tied to 3.3V on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the AP7361C-33FGE-7.

How is the AP7361C-33FGE-7 NC_2 pin connected?

The NC_2 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the AP7361C-33FGE-7.

How is the AP7361C-33FGE-7 ADJ/NC_3 pin connected?

The ADJ/NC_3 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the AP7361C-33FGE-7.

What parts are used alongside the AP7361C-33FGE-7?

The USBLC6-2SC6, ICM-42688-P, AT7456E, BMP388 and ESP32-C3 appear in the most repositories here.

Which microcontrollers do boards using the AP7361C-33FGE-7 use?

Most are built on RP2040/RP2350 (4), STM32 (2), ESP32 (1) and Microchip SAM (1).

How big is a typical board using the AP7361C-33FGE-7?

The median is 39.5 × 51 mm, and 11% are two-layer designs.

What is the most popular open source board using the AP7361C-33FGE-7?

By GitHub stars, LEVIA-H7 by piecol, with 68 stars.

Can I simulate one of these boards using the AP7361C-33FGE-7 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part