17 open source boards using the SN74LV1T125DBVR
Real designs built with the SN74LV1T125DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Gmsl deserializer
antmicro
75 × 60 mm225 parts4LApache-2.040ESP32
Dimmer esp v1 main
dagroe
44 × 48.1 mm53 parts4LMIT21NXP
Core64 LB v0.6
ageppert
85 × 170 mm136 parts2LGPL-3.016Jetson-AI-Cam-CopperPilot
CopperPilot
78 × 55 mm268 parts8LCERN-OHL-P-2.09RP2040/RP2350
Core16 LB
ageppert
88.9 × 50.8 mm124 parts2LNo license5RP2040/RP2350
Boardroom
sequoia-hope
21 × 51 mm54 parts4LMIT1AVR/Arduino
Pipette tool
rodrigue-laboratory
56 × 81.5 mm38 parts2LBSD-3-Clause1Thermocouple
meowthink
150 × 70 mm168 parts2LNo license0ESP32
Opentouch s3
JoeMighty
100 × 90 mm145 parts4LCustom license0STM32
F405-FC
FallenFireGit
36 × 36 mm121 parts6LNo license0Sensor-HAT
Eniemooo
65 × 56 mm94 parts4LCC-BY-SA-4.00Smu front
PaulBichl
150 × 45 mm18 parts2LNo license1NXP
Interactive Core Memory Badge (Logic) v0.3
ageppert
85 × 170 mm114 parts2LGPL-3.016RP2040/RP2350
Placed
sequoia-hope
21.1 × 51.1 mm57 parts2LMIT0RP2040/RP2350
Easy2350
sequoia-hope
21 × 51 mm54 parts4LMIT0RP2040/RP2350
Easy2350-ultraroute-971e723-regions s1
sequoia-hope
21 × 51 mm54 parts4LMIT0RP2040/RP2350
Easy2350-ultraroute ad79cd7
sequoia-hope
21 × 51 mm54 parts4LMIT0
How designs wire the SN74LV1T125DBVR
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the SN74LV1T125DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 10 µF).
- The Y pin has a series resistor on 9 of 13 designs, most often 330 Ω (then 470 Ω).
- The OE pin is tied to GND on 8 of 13 designs (a signal on 5).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OEpin 1 | Connected to: GND 62% · a signal 38% | — |
| Apin 2 | Connected to: The microcontroller 54%, a connector 38% |
|
| GNDpin 3 | Connected to: GND 85% · a signal 15% | — |
| Ypin 4 | Connected to: Signal 100% |
|
| VCCpin 5 | Connected to: 5V 77% · a signal 23% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gmsl deserializer by antmicro, Dimmer esp v1 main by dagroe, Core64 LB v0.6 by ageppert and Jetson-AI-Cam-CopperPilot by CopperPilot.
The SN74LV1T125DBVR in open source designs
The gallery holds 17 open source boards using the SN74LV1T125DBVR from 13 GitHub repositories; a typical one measures about 65 × 51 mm and carries around 94 components.
59% use four copper layers or more, and 71% carry an open source license.
The most starred is Gmsl deserializer by antmicro.
Parts used alongside the SN74LV1T125DBVR
Microcontrollers on boards using the SN74LV1T125DBVR
What boards using the SN74LV1T125DBVR are built for
SN74LV1T125DBVR: common questions
Where can I find a SN74LV1T125DBVR reference design?
Each of the 17 boards on this page is a real design using the SN74LV1T125DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LV1T125DBVR VCC pin?
The VCC pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 13 open source designs using the SN74LV1T125DBVR.
What resistor goes on the SN74LV1T125DBVR Y pin?
The Y pin has a series resistor on 9 of 13 designs, most often 330 Ω (then 470 Ω). Counted from the KiCad layouts of 13 open source designs using the SN74LV1T125DBVR.
How is the SN74LV1T125DBVR OE pin connected?
The OE pin is tied to GND on 8 of 13 designs (a signal on 5). Counted from the KiCad layouts of 13 open source designs using the SN74LV1T125DBVR.
What parts are used alongside the SN74LV1T125DBVR?
The USBLC6-2SC6, AP7361C-33FGE-7, RP2350A, SN74HC02DR and SRV05-4-P-T7 appear in the most repositories here.
Which microcontrollers do boards using the SN74LV1T125DBVR use?
Most are built on RP2040/RP2350 (6), ESP32 (2), NXP (2) and AVR/Arduino (1).
How big is a typical board using the SN74LV1T125DBVR?
The median is 65 × 51 mm, and 41% are two-layer designs.
What is the most popular open source board using the SN74LV1T125DBVR?
By GitHub stars, Gmsl deserializer by antmicro, with 40 stars.
Can I simulate one of these boards using the SN74LV1T125DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.