HardLabs

CM4IOv5-clone

sergiomd4·CM4IOv5-clone·Hardware/CM4IOv5.kicad_pcb

CM4IOv5-clone PCB layout, top view — open source Raspberry Pi board by sergiomd4
Simulate this board

About the CM4IOv5-clone PCB

CM4IOv5-clone is an open source Raspberry Pi PCB design by sergiomd4, published on GitHub under the CC0-1.0 license. It is a 4-layer board measuring 160 × 90 mm, with 137 components from 56 distinct parts.

Its main chip is the ComputeModule4, from the Raspberry Pi family. Other key parts include the TPD4EUSB30, MagJack-A70-112-331N126, 74LVC1G07SE-7, USB2514B-I/M2 and AP22653W6. By type, the board carries 59 capacitors, 31 resistors, 20 connectors, 16 ICs, 4 diodes and 2 crystals.

From the project

Compute Module 4 IO Board

Compute Module 4 IO Board Clone ========================================

Specifications ------------------- External power connector (+12V, +5V) 2 x full-size HDMI 2.0 connectors 2 x USB 2.0 connectors, with header for two additional connectors Gigabit Ethernet RJ45 with PoE support Micro USB socket for updating Compute Module 4 MicroSD card socket for Compute Module 4 Lite (without eMMC) variants PCIe Gen 2 x1 socket Standard fan connector 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable) Standard Raspberry Pi…

Main components on the CM4IOv5-clone

TPD4EUSB30MagJack-A70-112-331N12674LVC1G07SE-7USB2514B-I/M2AP22653W6PCF85063AT/AAZEMC2301-1-ACZL-TRRT9742SNGVFSUSB42MUXAP64501SP-13RT9742GGJ5

CM4IOv5-clone bill of materials (BOM)

137 components, 56 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
TPD4EUSB30
U1, U2, U4
1
MagJack-A70-112-331N126
U3
3
74LVC1G07SE-7
U5, U9, U14
1
USB2514B-I/M2
U6
1
AP22653W6
U7
1
PCF85063AT/AAZ
U8
1
EMC2301-1-ACZL-TR
U11
1
RT9742SNGV
U12
1
FSUSB42MUX
U13
2
AP64501SP-13
U15, U16
1
RT9742GGJ5
U18
1
DMP3013SFV-7
Q1
1
24MHz
Y1
1
X32K768S301
Y2
2
Conn_01x03
J1, J3
1
Conn_02x07_Odd_Even
J2
4
Conn_01x22_Female
J4, J5, J15, J16
2
THD-02-R
J6, J9
1
Micro_SD_Card_Det
J7
1
THD-20-R
J8
Show 36 more
QtyPartRefs
2
690-019-298-412
J10, J22
1
USB_OTG
J11
1
10018783-11200TLF
J12
1
690-008-221-904
J13
1
Conn_02x05_Odd_Even
J14
1
Molex 470531000
J17
1
Barrel_Jack
J19
1
AMP171826-4
J20
1
Battery_Cell
BT1
1
ComputeModule4
Module1
1
LED Red
D1
1
LED Green
D2
1
BAT54C-7-F
D3
1
MMBZ5242BLT3G
D4
2
SRN6045TA-3R3Y
L3, L5
18
100n
C1, C3, C4, C7, C11, C12, C13, C14 +10
16
10u
C2, C5, C6, C10, C17, C19, C20, C21 +8
2
27pF
C8, C9
3
100uF
C16, C18, C45
13
10u 35v
C25, C26, C27, C28, C34, C35, C37, C38 +5
1
100n 100v
C36
4
nf
C59, C61, C63, C65
2
1.2nF
C60, C64
2
1k
R1, R10
2
470R
R2, R3
1
nf
R4
1
0R
R5
5
2.2K 1%
R6, R7, R8, R11, R28
2
10R
R9, R22
5
36K 1%
R12, R13, R14, R16, R21
5
12K 1%
R15, R23, R26, R27, R29
2
nf
R17, R18
2
510K 1%
R19, R20
1
47K 1%
R24
1
20K 1%
R25
2
15K 1%
R30, R36

CM4IOv5-clone design files

The KiCad project lives in the sergiomd4/CM4IOv5-clone repository on GitHub; these links point at the commit this page was built from.

CM4IOv5-clone: common questions

What microcontroller does the CM4IOv5-clone use?

The CM4IOv5-clone is built around the ComputeModule4, from the Raspberry Pi family.

How big is the CM4IOv5-clone PCB?

The CM4IOv5-clone measures 160 × 90 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the CM4IOv5-clone?

137 components, from 56 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CM4IOv5-clone design files?

From the sergiomd4/CM4IOv5-clone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the CM4IOv5-clone design in my own project?

Yes, under the terms of its CC0-1.0 license, which sergiomd4 chose for the repository.

Can I test firmware for the CM4IOv5-clone without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards