Inkplate6COLOR Soldered panel
About the Inkplate6COLOR Soldered panel PCB
Inkplate6COLOR Soldered panel is an open source ESP32 PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 268.8 × 117.5 mm, with 176 components from 58 distinct parts.
Its main chip is the ESP32-WROVER, from the ESP32 family. Other key parts include the PCAL6416AHF,128, TPS3840PL27DBVR, CH340C, MCP73831T and MC14093BDTR2G. By type, the board carries 48 relays, 40 capacitors, 36 resistors, 12 transistors, 8 ICs and 8 diodes.
From the project
Hardware design, BOM, gerbers and 3D files for Soldered-Inkplate-6-COLOR designed by Soldered Electronics.
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Inkplate6COLOR Soldered panel
Inkplate6COLOR Soldered panel bill of materials (BOM)
176 components, 58 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCAL6416AHF,128 | PCAL6416AHF,128 | U1 |
| 1 | ESP32-WROVER | ESP32-WROVER | U2 |
| 1 | TPS3840PL27DBVR | SOT-23-5 | U3 |
| 1 | CH340C | SOP-16 | U4 |
| 1 | MCP73831T | SOT-23-5 | U5 |
| 1 | MC14093BDTR2G | TSSOP-14 | U6 |
| 1 | TPS7A2633DRVR | TPS7A2633DRVR | U7 |
| 1 | PCF85063A | PCF85063A | U8 |
| 3 | NPN | SOT-23-3 | Q1, Q2, Q7 |
| 2 | NMOS | SOT-23-3 | Q3, Q10 |
| 4 | PMOS | SOT-23-3 | Q4, Q5, Q9, Q11 |
| 2 | SSM3J358R,LF | SOT-23-3 | Q6, Q8 |
| 1 | PMV164ENEAR | SOT-23-3 | Q12 |
| 1 | 7LC32768F12UC | ABS07AIG-32.768KHZ-7-D-T | X1 |
| 1 | 1206FUSE-500mA | 1206FUSE | F1 |
| 4 | Standoff_M3 | Standoff_M3 | H1, H2, H3, H4 |
| 5 | SMD_JUMPER_3_PAD_CONNECTED_LEFT_TRACE | SMD_JUMPER_3_PAD_CONNECTED_LEFT_TRACE | JP1, JP2, JP3, JP5, JP6 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP4 |
| 41 | HEADER_MALE_1X1_Inkplate | HEADER_MALE_1X1_Inkplate | K1, K2, K3, K4, K5, K6, K7, K8 +33 |
| 1 | Inkplate_TP | INKPLATE TEST HEADER | K34 |
Show 38 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | U262-161N-4BVC11 | U262-161N-4BVC11 | K35 |
| 1 | easyC-SMD | easyC-connector | K36 |
| 1 | JST-2pin-SMD | JST-2pin-SMD | K41 |
| 1 | CR2032_BS-6-1 | CR2032-BS-6-1 | K43 |
| 1 | HYC77-TF09-200 | HYC77-TF09-200 | K44 |
| 1 | SFV24R-2STBE1HLF | SFV24R-2STBE1HLF | K45 |
| 7 | PAD_4x4 | PAD_4x4 | PAD1, PAD2, PAD3, PAD4, PAD5, PAD7, PAD9 |
| 1 | SK-3296S-01-L1 | SK-3296S-01-L1 | S1 |
| 1 | YTSA007A0151803B | YTSA007A0151803B | SW1 |
| 2 | K2-1114SA-A4SW-06 | K2-1114SA-A4SW-06 | SW2, SW3 |
| 1 | RED | 0402LED | D1 |
| 1 | 0603LED_SIDE | LTST-S270GKT | D2 |
| 1 | BAT20J | SOD-323 | D3 |
| 2 | M4_DIODA | M4_DIODA | D4, D5 |
| 3 | MBR0530T1G | SOD−123 | D6, D7, D8 |
| 1 | SRN5020TA-100M | SRN5020TA-2R2M | L1 |
| 3 | 10u | 1206C | C1, C8, C14 |
| 6 | 2u2 | 0603C | C2, C12, C13, C15, C18, C24 |
| 13 | 100n | 0603C | C3, C4, C5, C7, C9, C10, C16, C17 +5 |
| 2 | DNP | 2917C | C6, C11 |
| 2 | 12p | 0603C | C21, C22 |
| 1 | 885012206075 | 0603C | C27 |
| 7 | GRM188C81E475KE11J | 0603C | C28, C29, C30, C32, C33, C34, C35 |
| 4 | GMK107BJ105KAHT | 0603C | C31, C37, C39, C40 |
| 1 | CL21A106KAYNNNG | 0805C | C36 |
| 1 | UMK212BBJ475KG | 0805C | C38 |
| 10 | 10k | 0603R | R1, R8, R9, R24, R29, R30, R31, R33 +2 |
| 2 | 5k1 | 0603R | R2, R3 |
| 1 | 47k | 0603R | R4 |
| 5 | 1k | 0603R | R5, R6, R10, R17, R19 |
| 11 | 100k | 0603R | R7, R12, R13, R18, R20, R21, R22, R23 +3 |
| 1 | 510k | 0603R | R11 |
| 1 | 2k49 | 0603R | R14 |
| 1 | 47R | 0603R | R15 |
| 1 | DNP | 0603R | R16 |
| 1 | 100R | 0603R | R28 |
| 1 | 0R47 | 0603R | R32 |
| 1 | AC0603FR-1356KL | 0603R | R36 |
Inkplate6COLOR Soldered panel design files
The KiCad project lives in the SolderedElectronics/Soldered-Inkplate-6-COLOR-hardware-design repository on GitHub; these links point at the commit this page was built from.
Inkplate6COLOR Soldered panel: common questions
What microcontroller does the Inkplate6COLOR Soldered panel use?
The Inkplate6COLOR Soldered panel is built around the ESP32-WROVER, from the ESP32 family.
How big is the Inkplate6COLOR Soldered panel PCB?
The Inkplate6COLOR Soldered panel measures 268.8 × 117.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Inkplate6COLOR Soldered panel?
176 components, from 58 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Inkplate6COLOR Soldered panel design files?
From the SolderedElectronics/Soldered-Inkplate-6-COLOR-hardware-design repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Inkplate6COLOR Soldered panel design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Can I test firmware for the Inkplate6COLOR Soldered panel without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Soldered-Inkplate-6-COLOR-hardware-design
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k