26 open source boards using the PCAL6416AHF,128

Real designs built with the PCAL6416AHF,128, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

26 boardsClear filters|Most starred

How designs wire the PCAL6416AHF,128

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the PCAL6416AHF,128 connects to, and the resistors, capacitors and other passives placed on it.

  • The SCL pin has a pull-up to 3.3V on 9 of 14 designs, most often 10 kΩ (then 2 kΩ).
  • The SDA pin has a pull-up to 3.3V on 9 of 14 designs, most often 10 kΩ (then 2 kΩ).
  • The VDD pin has a decoupling capacitor on 9 of 14 designs, most often 100 nF (then 10 µF).
  • The INT pin has a pull-up to 3.3V on 9 of 14 designs, most often 10 kΩ.
P0_3pin 4Connected to: TPS65186RGZ 21% · not connected 21%
  • Resistor to GND on 50% · 100 kΩ (7)
P0_4pin 5Connected to: TPS65186RGZ 21%
  • Resistor to GND on 50% · 100 kΩ (7)
P0_5pin 6Connected to: TPS65186RGZ 21%
  • Resistor to GND on 50% · 100 kΩ (7)
VSS(GND)pin 9Connected to: GND 71% · a signal 29%
P1_0pin 10Connected to: Signal 71% · not connected 29%
  • Resistor to GND on 50% · 100 kΩ (1)
ADDRpin 18Connected to: GND 64% · a signal 36%
SCLpin 19Connected to: The microcontroller 79%, PCF85063A 36%, PCAL6416AHF,128 29%
  • Pull-up to 3.3V on 64% · 10 kΩ (8), 2 kΩ (1)
SDApin 20Connected to: The microcontroller 79%, PCF85063A 36%, PCAL6416AHF,128 29%
  • Pull-up to 3.3V on 64% · 10 kΩ (8), 2 kΩ (1)
VDDpin 21Connected to: 3.3V 71% · a signal 29%
  • Decoupling capacitor on 64% · 100 nF (12), 10 µF (2), 1 nF (1)
INTpin 22Connected to: Signal 71% · not connected 29%
  • Pull-up to 3.3V on 64% · 10 kΩ (9)
VDD(I2C_BUS)pin 23Connected to: 3.3V 71% · a signal 29%
  • Decoupling capacitor on 64% · 100 nF (10), 10 µF (2), 1 nF (1)
PADpin 25Connected to: GND 64% · a signal 29%

13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FunKey-S-Hardware by FunKey-Project, Zerowriter Inkplate 5 Gen2 by zerowriter, Inkplate10 Soldered by SolderedElectronics and Bartender pump array by dburnsii.

The PCAL6416AHF,128 in open source designs

The gallery holds 26 open source boards using the PCAL6416AHF,128 from 14 GitHub repositories; a typical one measures about 144.4 × 107.8 mm and carries around 241 components.

92% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is FunKey-S-Hardware by FunKey-Project.

Microcontrollers on boards using the PCAL6416AHF,128

PCAL6416AHF,128: common questions

Where can I find a PCAL6416AHF,128 reference design?

Each of the 26 boards on this page is a real design using the PCAL6416AHF,128. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the PCAL6416AHF,128 SCL pin?

The SCL pin has a pull-up to 3.3V on 9 of 14 designs, most often 10 kΩ (then 2 kΩ). Counted from the KiCad layouts of 14 open source designs using the PCAL6416AHF,128.

What pull-up resistor is used on the PCAL6416AHF,128 SDA pin?

The SDA pin has a pull-up to 3.3V on 9 of 14 designs, most often 10 kΩ (then 2 kΩ). Counted from the KiCad layouts of 14 open source designs using the PCAL6416AHF,128.

What decoupling capacitors do designs use on the PCAL6416AHF,128 VDD pin?

The VDD pin has a decoupling capacitor on 9 of 14 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 14 open source designs using the PCAL6416AHF,128.

What parts are used alongside the PCAL6416AHF,128?

The CH340C, TPS3840PL27DBVR, TPS7A2633DRVR, ESP32-WROVER and MC14093BDTR2G appear in the most repositories here.

Which microcontrollers do boards using the PCAL6416AHF,128 use?

Most are built on ESP32 (24).

How big is a typical board using the PCAL6416AHF,128?

The median is 144.4 × 107.8 mm, and 92% are two-layer designs.

What is the most popular open source board using the PCAL6416AHF,128?

By GitHub stars, FunKey-S-Hardware by FunKey-Project, with 123 stars.

Can I simulate one of these boards using the PCAL6416AHF,128 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part