23 open source boards using the MC14093BDTR2G

Real designs built with the MC14093BDTR2G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

23 boardsClear filters|Most starred

How designs wire the MC14093BDTR2G

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the MC14093BDTR2G connects to, and the resistors, capacitors and other passives placed on it.

  • The OUTA pin is left unconnected on 11 of 11 designs.
  • The OUTB pin is left unconnected on 11 of 11 designs.
  • The OUTC pin has a series resistor on 8 of 11 designs, most often 100 kΩ.
  • The IN1D pin has a series resistor on 8 of 11 designs, most often 100 kΩ.
IN1Apin 1Connected to: GND 64% · a signal 36%
  • Series capacitor on 36% · 100 nF (15), 2.2 µF (4)
  • Series resistor on 36% · 5.1 kΩ (4), 100 kΩ (1)
IN2Apin 2Connected to: GND 64% · a signal 36%
  • Series capacitor on 36% · 100 nF (15), 2.2 µF (4)
  • Series resistor on 36% · 5.1 kΩ (4), 100 kΩ (1)
OUTApin 3Connected to: Not connected 100%
OUTBpin 4Connected to: Not connected 100%
IN1Bpin 5Connected to: GND 64% · a signal 36%
  • Series capacitor on 36% · 100 nF (15), 2.2 µF (3)
  • Series resistor on 36% · 5.1 kΩ (5), 100 kΩ (1)
IN2Bpin 6Connected to: GND 64% · a signal 36%
  • Series capacitor on 36% · 100 nF (15), 2.2 µF (3)
  • Series resistor on 36% · 5.1 kΩ (5), 100 kΩ (1)
VSSpin 7Connected to: GND 64% · a signal 36%
  • Series capacitor on 36% · 100 nF (14), 2.2 µF (3)
  • Series resistor on 36% · 5.1 kΩ (6), 100 kΩ (1)
IN1Cpin 8Connected to: Signal 73% · not connected 27%
  • Series resistor on 64% · 100 kΩ (7)
IN2Cpin 9Connected to: Signal 73% · not connected 27%
  • Series resistor on 64% · 100 kΩ (7)
OUTCpin 10Connected to: Signal 82% · not connected 18%
  • Series resistor on 73% · 100 kΩ (8)
OUTDpin 11Connected to: Signal 100%
  • Series resistor on 64% · 100 kΩ (7)
IN1Dpin 12Connected to: Signal 82% · not connected 18%
  • Series resistor on 73% · 100 kΩ (8)
IN2Dpin 13Connected to: Signal 82% · not connected 18%
  • Series resistor on 73% · 100 kΩ (8)
VDDpin 14Connected to: Signal 100%
  • Pull-up to VIN on 64%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Inkplate10 Soldered by SolderedElectronics, Soldered Inkplate 4 TEMPERA with glass panel by SolderedElectronics, Inkplate 6 SS panel by SolderedElectronics and Soldered Inkplate 5 Gen2 by SolderedElectronics.

The MC14093BDTR2G in open source designs

The gallery holds 23 open source boards using the MC14093BDTR2G from 11 GitHub repositories; a typical one measures about 144.4 × 107.8 mm and carries around 241 components.

91% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Soldered Inkplate 10 by SolderedElectronics.

Microcontrollers on boards using the MC14093BDTR2G

What boards using the MC14093BDTR2G are built for

MC14093BDTR2G: common questions

Where can I find a MC14093BDTR2G reference design?

Each of the 23 boards on this page is a real design using the MC14093BDTR2G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MC14093BDTR2G OUTA pin connected?

The OUTA pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the MC14093BDTR2G.

How is the MC14093BDTR2G OUTB pin connected?

The OUTB pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the MC14093BDTR2G.

What resistor goes on the MC14093BDTR2G OUTC pin?

The OUTC pin has a series resistor on 8 of 11 designs, most often 100 kΩ. Counted from the KiCad layouts of 11 open source designs using the MC14093BDTR2G.

What parts are used alongside the MC14093BDTR2G?

The CH340C, MCP73831T, PCAL6416AHF,128, TPS3840PL27DBVR and TPS7A2633DRVR appear in the most repositories here.

Which microcontrollers do boards using the MC14093BDTR2G use?

Most are built on ESP32 (23).

How big is a typical board using the MC14093BDTR2G?

The median is 144.4 × 107.8 mm, and 91% are two-layer designs.

What is the most popular open source board using the MC14093BDTR2G?

By GitHub stars, Soldered Inkplate 10 by SolderedElectronics, with 18 stars.

Can I simulate one of these boards using the MC14093BDTR2G before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part