24 open source boards using the PCF85063A
Real designs built with the PCF85063A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Zerowriter Inkplate 5 Gen2
zerowriter
130.6 × 75.2 mm252 parts2LGPL-3.046ESP32
Inkplate10 Soldered
SolderedElectronics
224.8 × 162.4 mm215 parts2LTAPR-OHL-1.018ESP32
Soldered Inkplate 4 TEMPERA with glass panel
SolderedElectronics
72 × 78 mm246 parts4LTAPR-OHL-1.05ESP32
Soldered Inkplate 6
SolderedElectronics
144.4 × 107.8 mm224 parts2LTAPR-OHL-1.05ESP32
Soldered Inkplate 5 Gen2
SolderedElectronics
130.6 × 75.2 mm258 parts2LTAPR-OHL-1.04ESP32
Soldered Inkplate 6COLOR
SolderedElectronics
131.4 × 105.5 mm177 parts2LTAPR-OHL-1.03ESP32
Soldered Inkplate 6 FLICK
SolderedElectronics
150.4 × 107.8 mm329 parts2LTAPR-OHL-1.02ESP32
Soldered Inkplate 6PLUS
SolderedElectronics
144.4 × 107.8 mm242 parts2LTAPR-OHL-1.02ESP32
Soldered Inkplate 6PLUS
SolderedElectronics
144.4 × 107.8 mm242 parts2LTAPR-OHL-1.01ESP32
Soldered Inkplate 5
SolderedElectronics
130.6 × 75.2 mm202 parts2LTAPR-OHL-1.00ESP32
Soldered-Inkplate-7-hardware design
SolderedElectronics
176.3 × 117.2 mm178 parts2LTAPR-OHL-1.00Soldered-Real time clock-PCF85063A-breakout hardware design
test-gh-syncer2
22 × 38 mm28 parts2LTAPR-OHL-1.00Real time clock-RTC-PCF85063A-breakout hardware design
SolderedElectronics
38 × 22 mm28 parts2LTAPR-OHL-1.00ESP32
Soldered Inkplate 10
SolderedElectronics
224.8 × 162.4 mm215 parts2LTAPR-OHL-1.018ESP32
Soldered Inkplate 4 TEMPERA with glass panel panel
SolderedElectronics
1.9 × 12 mm246 parts4LTAPR-OHL-1.05ESP32
Inkplate 6 SS panel
SolderedElectronics
294.8 × 119.8 mm223 parts2LTAPR-OHL-1.05ESP32
Soldered Inkplate 5 Gen2 panel
SolderedElectronics
8.2 × 17.5 mm258 parts2LTAPR-OHL-1.04ESP32
Inkplate6COLOR Soldered panel
SolderedElectronics
268.8 × 117.5 mm176 parts2LTAPR-OHL-1.03ESP32
Soldered Inkplate 6 FLICK panel
SolderedElectronics
33.7 × 6.2 mm329 parts2LTAPR-OHL-1.02ESP32
Inkplate 6PLUS panel
SolderedElectronics
294.8 × 119.8 mm241 parts2LTAPR-OHL-1.02ESP32
Inkplate 6PLUS panel
SolderedElectronics
294.8 × 119.8 mm241 parts2LTAPR-OHL-1.01ESP32
Soldered Inkplate 5 panel
SolderedElectronics
267.2 × 162.5 mm202 parts2LTAPR-OHL-1.00ESP32
Inkplate10 Soldered panel
SolderedElectronics
224.8 × 174.4 mm214 parts2LTAPR-OHL-1.018ESP32
Soldered Inkplate 6FLICK Gen2
SolderedElectronics
144.4 × 107.8 mm247 parts2LTAPR-OHL-1.02
How designs wire the PCF85063A
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the PCF85063A connects to, and the resistors, capacitors and other passives placed on it.
- The OSCI pin has a crystal on 10 of 12 designs, most often 32.768 kHz.
- The OSCO pin has a crystal on 10 of 12 designs, most often 32.768 kHz.
- The OSCI pin has a capacitor to GND on 8 of 12 designs, most often 12 pF (then 7 pF).
- The OSCO pin has a capacitor to GND on 8 of 12 designs, most often 12 pF (then 7 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OSCIpin 1 | Connected to: Signal 100% |
|
| OSCOpin 2 | Connected to: Signal 83% · not connected 17% |
|
| INTpin 4 | Connected to: Signal 92% |
|
| VSSpin 5 | Connected to: GND 67% · a signal 33% |
|
| SDApin 6 | Connected to: The microcontroller 58%, PCAL6416AHF,128 50%, TPS65186RGZ 33% |
|
| SCLpin 7 | Connected to: The microcontroller 58%, PCAL6416AHF,128 50%, TPS65186RGZ 33% |
|
| NCpin 8 | Connected to: Not connected 100% | — |
| VDDpin 10 | Connected to: 3.3V 67% · a signal 25% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Inkplate10 Soldered by SolderedElectronics, Soldered Inkplate 4 TEMPERA with glass panel by SolderedElectronics, Inkplate 6 SS panel by SolderedElectronics and Soldered Inkplate 5 Gen2 by SolderedElectronics.
The PCF85063A in open source designs
The gallery holds 24 open source boards using the PCF85063A from 13 GitHub repositories; a typical one measures about 144.4 × 107.8 mm and carries around 233 components.
92% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Zerowriter Inkplate 5 Gen2 by zerowriter.
Parts used alongside the PCF85063A
Microcontrollers on boards using the PCF85063A
What boards using the PCF85063A are built for
PCF85063A: common questions
Where can I find a PCF85063A reference design?
Each of the 24 boards on this page is a real design using the PCF85063A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the PCF85063A OSCI pin connected?
The OSCI pin has a crystal on 10 of 12 designs, most often 32.768 kHz. Counted from the KiCad layouts of 12 open source designs using the PCF85063A.
How is the PCF85063A OSCO pin connected?
The OSCO pin has a crystal on 10 of 12 designs, most often 32.768 kHz. Counted from the KiCad layouts of 12 open source designs using the PCF85063A.
What pull-up resistor is used on the PCF85063A INT pin?
The INT pin has a pull-up to 3.3V on 8 of 12 designs, most often 10 kΩ. Counted from the KiCad layouts of 12 open source designs using the PCF85063A.
What parts are used alongside the PCF85063A?
The CH340C, ESP32-WROVER, PCAL6416AHF,128, TPS3840PL27DBVR and TPS7A2633DRVR appear in the most repositories here.
Which microcontrollers do boards using the PCF85063A use?
Most are built on ESP32 (22).
How big is a typical board using the PCF85063A?
The median is 144.4 × 107.8 mm, and 92% are two-layer designs.
What is the most popular open source board using the PCF85063A?
By GitHub stars, Zerowriter Inkplate 5 Gen2 by zerowriter, with 46 stars.
Can I simulate one of these boards using the PCF85063A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.