25 open source boards using the TPS3840PL27DBVR

Real designs built with the TPS3840PL27DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

25 boardsClear filters|Most starred

How designs wire the TPS3840PL27DBVR

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the TPS3840PL27DBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The MR pin has a series resistor on 11 of 13 designs, most often 47 Ω (then 47 kΩ).
  • The CT pin is left unconnected on 12 of 13 designs.
  • The VDD pin has a decoupling capacitor on 9 of 13 designs, most often 10 µF (then 100 nF).
  • The MR pin has a pull-up to 3.3V on 9 of 13 designs, most often 47 kΩ (then 100 kΩ).
VDDpin 2Connected to: 3.3V 64% · a signal 36%
  • Decoupling capacitor on 69% · 10 µF (10), 100 nF (9), 12 pF (1)
  • Capacitor on 31% · 100 nF (7), 10 µF (6), 2.2 µF (2)
GNDpin 3Connected to: GND 62% · a signal 31%
  • Series capacitor on 31% · 100 nF (13), 10 µF (6), 2.2 µF (4)
MRpin 4Connected to: Signal 92%
  • Series resistor on 85% · 47 Ω (8), 47 kΩ (2), 470 Ω (1)
  • Pull-up to 3.3V on 69% · 47 kΩ (6), 100 kΩ (2), 10 kΩ (1)
  • Capacitor to GND on 62% · 2.2 µF (8)
CTpin 5Connected to: Not connected 92%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Zerowriter Inkplate 5 Gen2 by zerowriter, Inkplate10 Soldered by SolderedElectronics, Soldered-Inkplate-2-hardware design by SolderedElectronics and Soldered Inkplate 4 TEMPERA with glass panel by SolderedElectronics.

The TPS3840PL27DBVR in open source designs

The gallery holds 25 open source boards using the TPS3840PL27DBVR from 13 GitHub repositories; a typical one measures about 144.4 × 107.8 mm and carries around 241 components.

88% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Zerowriter Inkplate 5 Gen2 by zerowriter.

Microcontrollers on boards using the TPS3840PL27DBVR

What boards using the TPS3840PL27DBVR are built for

TPS3840PL27DBVR: common questions

Where can I find a TPS3840PL27DBVR reference design?

Each of the 25 boards on this page is a real design using the TPS3840PL27DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TPS3840PL27DBVR MR pin?

The MR pin has a series resistor on 11 of 13 designs, most often 47 Ω (then 47 kΩ). Counted from the KiCad layouts of 13 open source designs using the TPS3840PL27DBVR.

How is the TPS3840PL27DBVR CT pin connected?

The CT pin is left unconnected on 12 of 13 designs. Counted from the KiCad layouts of 13 open source designs using the TPS3840PL27DBVR.

What decoupling capacitors do designs use on the TPS3840PL27DBVR VDD pin?

The VDD pin has a decoupling capacitor on 9 of 13 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 13 open source designs using the TPS3840PL27DBVR.

What parts are used alongside the TPS3840PL27DBVR?

The CH340C, TPS7A2633DRVR, PCAL6416AHF,128, ESP32-WROVER and MC14093BDTR2G appear in the most repositories here.

Which microcontrollers do boards using the TPS3840PL27DBVR use?

Most are built on ESP32 (25).

How big is a typical board using the TPS3840PL27DBVR?

The median is 144.4 × 107.8 mm, and 88% are two-layer designs.

What is the most popular open source board using the TPS3840PL27DBVR?

By GitHub stars, Zerowriter Inkplate 5 Gen2 by zerowriter, with 46 stars.

Can I simulate one of these boards using the TPS3840PL27DBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part