Soldered-Inkplate-7-hardware design
SolderedElectronics·Soldered-Inkplate-7-hardware-design·CAD/V1.1.0/Soldered Inkplate 7.kicad_pcb
About the Soldered-Inkplate-7-hardware design PCB
Soldered-Inkplate-7-hardware design is an open source ESP32 PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 176.3 × 117.2 mm, with 178 components from 55 distinct parts.
Its main chip is the ESP32-WROVER, from the ESP32 family. Other key parts include the E075A01-A8, PCAL6416AHF,128, TPS3840PL27DBVR, CH340C and MCP73831T. By type, the board carries 48 relays, 40 resistors, 35 capacitors, 12 transistors, 9 ICs and 8 diodes.
From the project
Hardware design, BOM, gerbers and 3D files for Soldered-Inkplate-7 designed by Soldered Electronics.
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Soldered-Inkplate-7-hardware design
Soldered-Inkplate-7-hardware design bill of materials (BOM)
178 components, 55 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | E075A01-A8 | E075A01-A8 | U1 |
| 1 | PCAL6416AHF,128 | PCAL6416AHF,128 | U2 |
| 1 | ESP32-WROVER | ESP32-WROVER | U3 |
| 1 | TPS3840PL27DBVR | SOT-23-5 | U4 |
| 1 | CH340C | SOP-16 | U5 |
| 1 | MCP73831T | SOT-23-5 | U6 |
| 1 | MC14093BDTR2G | TSSOP-14 | U7 |
| 1 | TPS7A2633DRVR | TPS7A2633DRVR | U8 |
| 1 | PCF85063A | PCF85063A | U9 |
| 2 | NMOS | SOT-23-3 | Q1, Q6 |
| 4 | PMOS | SOT-23-3 | Q2, Q7, Q8, Q12 |
| 1 | CJ2310 | SOT-23-3 | Q3 |
| 3 | NPN | SOT-23-3 | Q4, Q5, Q10 |
| 2 | SSM3J358R,LF | SOT-23-3 | Q9, Q11 |
| 1 | 7LC32768F12UC | ABS07AIG-32.768KHZ-7-D-T | X1 |
| 1 | 1206FUSE-500MA 1206FUSE-500mA | 1206FUSE | F1 |
| 4 | STANDOFF_M3 Standoff_M3 | Standoff_M3 | H1, H2, H3, H4 |
| 5 | SMD_JUMPER_3_PAD_CONNECTED_LEFT_TRACE | SMD_JUMPER_3_PAD_CONNECTED_LEFT_TRACE | JP1, JP2, JP3, JP5, JP6 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP4 |
| 1 | SFV24R-2STBE1HLF | SFV24R-2STBE1HLF | K1 |
Show 35 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 41 | HEADER_MALE_1X1_INKPLATE HEADER_MALE_1X1_Inkplate | HEADER_MALE_1X1_Inkplate | K2, K3, K4, K5, K6, K7, K8, K9 +33 |
| 1 | Inkplate_TP | INKPLATE TEST HEADER | K38 |
| 1 | U262-161N-4BVC11 | U262-161N-4BVC11 | K39 |
| 1 | easyC-SMD | easyC-connector | K40 |
| 1 | JST-2PIN-SMD JST-2pin-SMD | JST-2pin-SMD | K45 |
| 1 | HYC77-TF09-200 | HYC77-TF09-200 | K47 |
| 1 | CR2032_BS-6-1 | CR2032-BS-6-1 | K48 |
| 9 | PAD_4X4 PAD_4x4 | PAD_4x4 | PAD1, PAD2, PAD3, PAD4, PAD5, PAD6, PAD7, PAD8 +1 |
| 1 | SK-3296S-01-L1 | SK-3296S-01-L1 | S1 |
| 1 | YTSA007A0151803B | YTSA007A0151803B | SW1 |
| 2 | K2-1114SA-A4SW-06 | K2-1114SA-A4SW-06 | SW2, SW3 |
| 3 | MBR0530T1G | SOD−123 | D1, D2, D3 |
| 1 | RED | 0402LED | D4 |
| 1 | 0603LED_SIDE | LTST-S270GKT | D5 |
| 1 | BAT20J | SOD-323 | D6 |
| 2 | M4_DIODA | M4_DIODA | D7, D8 |
| 1 | SRN5040TA-680K-68U SRN5040TA-680K-68u | SRN5040TA-680K | L1 |
| 4 | GMK107BJ105KAHT-1U-35V GMK107BJ105KAHT-1u-35V | 0603C | C1, C4, C5, C6 |
| 6 | UMK212BBJ475KG-T-4U7-50V UMK212BBJ475KG-T-4u7-50V | 0805C | C2, C3, C7, C8, C9, C10 |
| 3 | 10U 10u | 1206C | C11, C17, C23 |
| 2 | DNP | 2917C | C12, C20 |
| 6 | 2U2 2u2 | 0603C | C13, C21, C22, C24, C27, C33 |
| 12 | 100N 100n | 0603C | C14, C15, C16, C18, C19, C25, C26, C28 +4 |
| 2 | DNP | 0603C | C30, C31 |
| 1 | 100R | 0603R | R1 |
| 10 | 10K 10k | 0603R | R2, R3, R9, R11, R12, R15, R16, R21 +2 |
| 2 | DNP | 0603R | R4, R29 |
| 15 | 100K 100k | 0603R | R5, R6, R7, R8, R20, R25, R26, R31 +7 |
| 1 | 0R47 | 0603R | R10 |
| 2 | 5K1 5k1 | 0603R | R13, R14 |
| 1 | 47K 47k | 0603R | R17 |
| 5 | 1k | 0603R | R18, R19, R23, R30, R32 |
| 1 | 510K 510k | 0603R | R24 |
| 1 | 2K49 2k49 | 0603R | R27 |
| 1 | 47R | 0603R | R28 |
Soldered-Inkplate-7-hardware design design files
The KiCad project lives in the SolderedElectronics/Soldered-Inkplate-7-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-Inkplate-7-hardware design: common questions
What microcontroller does the Soldered-Inkplate-7-hardware design use?
The Soldered-Inkplate-7-hardware design is built around the ESP32-WROVER, from the ESP32 family.
How big is the Soldered-Inkplate-7-hardware design PCB?
The Soldered-Inkplate-7-hardware design measures 176.3 × 117.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-Inkplate-7-hardware design?
178 components, from 55 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered-Inkplate-7-hardware design design files?
From the SolderedElectronics/Soldered-Inkplate-7-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered-Inkplate-7-hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Can I test firmware for the Soldered-Inkplate-7-hardware design without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k