7 open source boards using the ESP8266-12E
Real designs built with the ESP8266-12E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
3 channel led driver rev0.4
Faust-Lighting
121.9 × 25.4 mm76 parts2LGPL-3.010ESP8266
ZX-Max-128-Issue-3
liveboxandy
213 × 84.8 mm164 parts2LNo license0ESP8266
ZX-Max-128-Issue-3A
liveboxandy
213 × 84.8 mm162 parts2LNo license0ESP8266
GOLMain RevA
gatechipdl
70 × 70 mm69 parts2LMIT0ESP8266
Jotter RevC
SpatialExperienceGroup
76.2 × 76.2 mm46 parts2LMIT0ESP8266
LO Main RevB
gatechipdl
70 × 70 mm51 parts2LMIT0ESP8266
Jotter RevD
SpatialExperienceGroup
76.2 × 76.2 mm46 parts2LMIT0
The ESP8266-12E in open source designs
The gallery holds 7 open source boards using the ESP8266-12E from 5 GitHub repositories; a typical one measures about 76.2 × 76.2 mm and carries around 69 components.
100% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.
The most starred is 3 channel led driver rev0.4 by Faust-Lighting.
Parts used alongside the ESP8266-12E
Microcontrollers on boards using the ESP8266-12E
What boards using the ESP8266-12E are built for
ESP8266-12E: common questions
Where can I find a ESP8266-12E reference design?
Each of the 7 boards on this page is a real design using the ESP8266-12E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ESP8266-12E?
The 3V3 1Amp, 74HC04, AD724JRZ, AS6C1008-55PCN and AT27C256R-45PU appear in the most repositories here.
Which microcontrollers do boards using the ESP8266-12E use?
Most are built on ESP8266 (7).
How big is a typical board using the ESP8266-12E?
The median is 76.2 × 76.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the ESP8266-12E?
By GitHub stars, 3 channel led driver rev0.4 by Faust-Lighting, with 10 stars.
Can I simulate one of these boards using the ESP8266-12E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.