CARVanta Sentinel v2

SridharCodeVersion·ImmunoGate_Code·hardware/sentinel/kicad/CARVanta_Sentinel_v2/CARVanta_Sentinel_v2.kicad_pcb

CARVanta Sentinel v2 PCB layout, top view — open source ESP32 board by SridharCodeVersion

About the CARVanta Sentinel v2 PCB

CARVanta Sentinel v2 is an open source ESP32 PCB design by SridharCodeVersion, published on GitHub under the Apache-2.0 license. It is a 6-layer board measuring 100 × 100 mm, with 86 components from 34 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N8R8, from the ESP32 family. Other key parts include the CH224K, BQ24075RGTR, TPS7A2033, TPS7A4533 and AP2112K-1.8. By type, the board carries 40 capacitors, 16 resistors, 14 ICs, 7 connectors, 4 diodes and 2 switches.

It belongs with the power & battery, rf & radio and iot & wireless designs in this gallery.

From the project

This board monitors 4 antigens simultaneously (CD19, CD22, BCMA, GPRC5D), meaning 4 independent electrochemical channels that MUST be electrically isolated from each other and from the digital noise of the ESP32 + WiFi radio.

This board monitors 4 antigens simultaneously (CD19, CD22, BCMA, GPRC5D), meaning 4 independent electrochemical channels that MUST be electrically isolated from each other and from the digital noise of the ESP32 + WiFi radio.

A 2-layer board cannot achieve this. Here's why each layer exists:

Main components on the CARVanta Sentinel v2

CARVanta Sentinel v2 bill of materials (BOM)

86 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1-N8R8
BQ24075RGT
U1
1
CH224K
AMS1117-3.3
U2
1
BQ24075RGTR
AMS1117-3.3
U3
1
TPS7A2033
ESP32-S3-WROOM-1
U4
1
TPS7A4533
TCA9548AMRGER
U5
1
AP2112K-1.8
LMP91000
U6
1
MAX17048
LMP91000
U7
1
BQ29700
LMP91000
U8
1
LMP91000
U9
1
LMP91000
ADS1256
U10
1
LMP91000
MAX30102
U11
1
LMP91000
MLX90614
U12
1
ADS1256IDBR
DS3231M
U13
1
TCA9548A
LIS2DH
U14
1
2N7002
Q1
1
USB_C_Receptacle_USB2.0_16P
J1
4
Conn_01x03_Pin
J2, J3, J4, J5
1
Conn_01x08
J6
1
Conn_01x06
J7
1
Buzzer
BZ1
Show 14 more
QtyPartRefs
2
SW_Push
SW1, SW2
4
WS2812B
D1, D2, D3, D4
1
600R
FB1
6
10u
C1, C3, C5, C6, C26, C39
3
22u
C2, C4, C9
25
100n
C7, C8, C10, C11, C12, C14, C15, C16 +17
4
10nF
C13, C17, C19, C21
1
1uF
C28
1
1u
C35
2
5.1k
R1, R2
2
1.5k
R3, R4
5
10k
R5, R6, R7, R8, R9
6
0.1k
R10, R11, R12, R13, R14, R15
1
100k
RN1

CARVanta Sentinel v2 design files

The KiCad project lives in the SridharCodeVersion/ImmunoGate_Code repository on GitHub; these links point at the commit this page was built from.

CARVanta Sentinel v2: common questions

What microcontroller does the CARVanta Sentinel v2 use?

The CARVanta Sentinel v2 is built around the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.

How big is the CARVanta Sentinel v2 PCB?

The CARVanta Sentinel v2 measures 100 × 100 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the CARVanta Sentinel v2?

86 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CARVanta Sentinel v2 design files?

From the SridharCodeVersion/ImmunoGate_Code repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the CARVanta Sentinel v2 design in my own project?

Yes, under the terms of its Apache-2.0 license, which SridharCodeVersion chose for the repository.

Can I test firmware for the CARVanta Sentinel v2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ImmunoGate_Code

Similar boards