8 open source boards using the ADS1256IDBR

Real designs built with the ADS1256IDBR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the ADS1256IDBR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ADS1256IDBR connects to, and the resistors, capacitors and other passives placed on it.

  • The VREFP pin has a series capacitor on 4 of 5 designs, most often 100 nF (then 47 µF).
  • The AIN0 pin has a series capacitor on 4 of 5 designs, most often 100 nF (then 100 pF).
  • The AIN1 pin has a series capacitor on 4 of 5 designs, most often 100 nF (then 100 pF).
  • The AIN4 pin has a series capacitor on 4 of 5 designs, most often 100 pF (then 100 nF).
AVDDpin 1Connected to: 5V 60% · not connected 40%
  • Decoupling capacitor on 60% · 100 nF (3), 10 µF (2), 1 µF (1)
AGNDpin 2Connected to: GND 60% · 3.3V 40%
  • Series capacitor on 40% · 100 nF (2)
VREFNpin 3Connected to: Not connected 40% · GND 20% · a signal 40%
  • Series capacitor on 40% · 100 nF (2), 47 µF (2), 100 pF (2)
  • Resistor to GND on 40% · 49.9 Ω (2)
VREFPpin 4Connected to: Signal 60% · 3.3V 40%
  • Series capacitor on 80% · 100 nF (4), 47 µF (2), 100 pF (2)
  • Series resistor on 40% · 49.9 Ω (2)
AINCOMpin 5Connected to: GND 60% · 3.3V 40%
  • Series capacitor on 40% · 100 nF (2)
AIN0pin 6Connected to: Signal 60% · 3.3V 40%
  • Series capacitor on 80% · 100 nF (4), 100 pF (2)
  • Series resistor on 60% · 330 Ω (2), 10 Ω (1)
AIN1pin 7Connected to: Signal 60% · 3.3V 40%
  • Series capacitor on 80% · 100 nF (4), 100 pF (2)
  • Series resistor on 60% · 330 Ω (2), 10 Ω (1)
AIN2pin 8Connected to: Signal 60% · 3.3V 40%
  • Series resistor on 60% · 330 Ω (2), 10 Ω (1)
  • Series capacitor on 40% · 100 pF (2), 100 nF (2)
AIN3pin 9Connected to: Signal 60% · 3.3V 40%
  • Series resistor on 60% · 330 Ω (2), 10 Ω (1)
  • Series capacitor on 40% · 100 pF (2), 100 nF (2)
AIN4pin 10Connected to: Signal 60% · 3.3V 40%
  • Series capacitor on 80% · 100 pF (2), 100 nF (2), 10 µF (2)
  • Series resistor on 60% · 330 Ω (2), 10 Ω (1)
AIN5pin 11Connected to: Signal 60% · 3.3V 40%
  • Series capacitor on 80% · 100 pF (2), 100 nF (2), 10 µF (2)
  • Series resistor on 60% · 330 Ω (2), 10 Ω (1)
AIN6pin 12Connected to: 3.3V 40% · not connected 20% · a signal 40%
  • Series capacitor on 80% · 100 pF (2), 100 nF (2), 10 µF (2)
  • Series resistor on 40% · 330 Ω (2)
AIN7pin 13Connected to: 3.3V 40% · not connected 20% · a signal 40%
  • Series capacitor on 80% · 100 pF (2), 100 nF (2), 10 µF (2)
  • Series resistor on 40% · 330 Ω (2)
SYNC,_PDWNpin 14Connected to: ADS1256IDBR 40%, the microcontroller 40% · 3.3V 40%
  • Pull-up to 3.3V on 40% · 10 kΩ (2)
  • Series capacitor on 40% · 10 µF (2)
RESETpin 15Connected to: ADS1256IDBR 40%, the microcontroller 40%, LMP91000 40%
  • Pull-up to 3.3V on 60% · 10 kΩ (2)
DVDDpin 16Connected to: LMP91000 40%, TCA9548A 40% · 3.3V 40%
  • Capacitor to GND on 60% · 100 nF (5), 10 µF (2)
DGNDpin 17Connected to: GND 100%
XTAL2pin 18Connected to: Signal 100%
  • Crystal on 100%
  • Capacitor to GND on 100% · 20 pF (2), 18 pF (1)
XTAL1/CLKINpin 19Connected to: Signal 100%
  • Crystal on 100%
  • Capacitor to GND on 100% · 20 pF (2), 18 pF (1)
CSpin 20Connected to: Signal 67% · GND 33%
  • Series resistor on 67% · 100 Ω (2)
DINpin 23Connected to: Signal 100%
  • Series resistor on 67% · 100 Ω (2)
SCLKpin 24Connected to: Signal 100%
  • Series resistor on 67% · 100 Ω (2)
D0/CLKOUTpin 25Connected to: Not connected 67% · a signal 33%
D1pin 26Connected to: Not connected 67% · a signal 33%
D2pin 27Connected to: Not connected 67% · a signal 33%
D3pin 28Connected to: Not connected 67% · a signal 33%

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sensors Module by Queens-Rocket-Engineering-Team, Flatburn lte by MIT-Senseable-City-Lab, Av instrumentation by Queens-Rocket-Engineering-Team and CARVanta Sentinel v2 by SridharCodeVersion.

The ADS1256IDBR in open source designs

The gallery holds 8 open source boards using the ADS1256IDBR from 6 GitHub repositories; a typical one measures about 93.5 × 91 mm and carries around 135 components.

88% use four copper layers or more, and 63% carry an open source license.

The most starred is Sensors Module by Queens-Rocket-Engineering-Team.

Microcontrollers on boards using the ADS1256IDBR

ADS1256IDBR: common questions

Where can I find a ADS1256IDBR reference design?

Each of the 8 boards on this page is a real design using the ADS1256IDBR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ADS1256IDBR VREFP pin connected?

The VREFP pin has a series capacitor on 4 of 5 designs, most often 100 nF (then 47 µF). Counted from the KiCad layouts of 5 open source designs using the ADS1256IDBR.

How is the ADS1256IDBR AIN0 pin connected?

The AIN0 pin has a series capacitor on 4 of 5 designs, most often 100 nF (then 100 pF). Counted from the KiCad layouts of 5 open source designs using the ADS1256IDBR.

How is the ADS1256IDBR AIN1 pin connected?

The AIN1 pin has a series capacitor on 4 of 5 designs, most often 100 nF (then 100 pF). Counted from the KiCad layouts of 5 open source designs using the ADS1256IDBR.

What parts are used alongside the ADS1256IDBR?

The AMS1117-3.3, AMS1117-5.0, AP2112K-1.8, BQ24075RGTR and BQ29700 appear in the most repositories here.

Which microcontrollers do boards using the ADS1256IDBR use?

Most are built on ESP32 (2), RP2040/RP2350 (2), STM32 (2) and NXP (1).

How big is a typical board using the ADS1256IDBR?

The median is 93.5 × 91 mm, and 13% are two-layer designs.

What is the most popular open source board using the ADS1256IDBR?

By GitHub stars, Sensors Module by Queens-Rocket-Engineering-Team, with 3 stars.

Can I simulate one of these boards using the ADS1256IDBR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part