IoT AgriFarm

sudo-junkie·IoT_AgriFarm·SRC/IoT_Agrifarm.kicad_pcb

IoT AgriFarm PCB layout, top view — open source RP2040/RP2350 board by sudo-junkie

About the IoT AgriFarm PCB

IoT AgriFarm is an open source RP2040/RP2350 PCB design by sudo-junkie, published on GitHub under the GPL-2.0 license. It is a 4-layer board measuring 53.3 × 58.4 mm, with 120 components from 57 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the AP2171WG-7, USBLC6-2P6, DW01A-G, 8205A and BQ25672RQMR. By type, the board carries 45 capacitors, 34 resistors, 16 ICs, 6 connectors, 6 diodes and 4 inductors.

It belongs with the power & battery, sensors and iot & wireless designs in this gallery.

From the project

A solar powered smart farm controller based on RP2040 with MPPT.

KiCad 7 design files (schematic, PCB, BOM, gerbers) for a solar powered smart farm controller based on RP2040

- USB-C - firmware upload & debugging - 24V 2A Boost converter - to power water pump - RS-485 transciever - for NPK sensor - Soil moisture, soil temperature, soil PH relative humidity and ambient temperature sensors

IoT AgriFarm, from the project README
From the project README

Main components on the IoT AgriFarm

IoT AgriFarm bill of materials (BOM)

120 components, 57 distinct parts.

QtyPartRefs
1
AP2171WG-7
AP2171W
U101
1
USBLC6-2P6
U102
2
DW01A-G
DW01A
U201, U204
2
8205A
U202, U205
1
BQ25672RQMR
U203
1
L78L05ABUTR
L78L05
U206
1
SD8942
U207
1
RP2040
U301
1
GD25Q128EWIGR
25Q128
U302
1
B3B-XH-A(LF)(SN)
DS18B20
U401
1
DHT11
U402
1
MAX3362EKA+T
MAX3362
U403
1
Ra-02
Ai-Thinker-Ra-02
U501
1
SY7208ABC
SY7208
U601
2
AO3401
AO3401A
Q101, Q201
1
ALS-PT19-315C/L177/TR8
Q_Photo_NPN
Q401
1
CF4012M00012
12MHz
Y301
1
DB128V-5.08-4P-GN-S
J_PUMP
J101
1
DB128V-5.08-2P-GN-S
J_PANEL
J102
1
B2B-XH-A(LF)(SN)
Conn_NPK
J103
Show 37 more
QtyPartRefs
1
TYPE-C 24P QT 143
USB_C_Receptacle_USB2.0
J104
1
B6B-XH-A(LF)(SN)
Conn_PH
J401
1
B3B-XH-A(LF)(SN)
Conn_MOISTURE
J402
1
B2B-XH-A(LF)(SN)
BATT2
BT201
1
B2B-XH-A(LF)(SN)
BATT1
BT202
1
0501020.WR
Fuse
F101
1
B3U-1000P
SW_Push
SW301
1
B3U-1000P
SW_BOOT
SW302
1
SMF15CA
D_TVS
D101
1
XL-1005SURC
LED_STAT
D201
1
PMEG2020EJ,115
2.5A
D202
2
ESD131B1W0201E6327
ESD131
D401, D402
1
SS34
D601
1
SDFL1005Q1R0KTF
1u 10% 15mA
L101
2
XR0412-1R0M
1u 20% 4.5A
L201, L202
1
PSPMAA0603-100M-ANF
10u
L601
18
CL03A104KO3NNNC
100n
C201, C202, C205, C207, C209, C214, C218, C301 +10
18
GRM188R61E106KA73D
10u
C203, C204, C210, C211, C212, C215, C216, C217 +10
1
GRM0335C1E102GA01D
1n
C206
2
CC0201KRX5R8BB473
47n
C208, C213
1
CC0402KRX7R8BB223
22n
C223
2
CL03A105KP3NSNC
1u
C308, C313
2
GRM0335C1E220FA01D
22p
C309, C310
1
CL05A225MP5NSNC
2u2
C501
7
RC0402FR-0710KL
10K
R101, R305, R404, R405, R406, R407, R408
5
AR03BTCX5001
5K1
R102, R103, R208, R211, R603
3
RC0603FR-07100RL
100R
R201, R205, R207
6
AC0402FR-071KL
1K
R202, R210, R304, R401, R402, R403
1
RC0402FR-07127KL
127K
R203
2
RC0402FR-07100KL
100K
R204, R213
1
RC0402FR-072K2L
2K2
R206
1
RC0201FR-0733KL
33K
R209
3
RTT011051FTH
1.05K
R212, R301, R306
1
RC0402FR-0725K5L
25K5
R214
2
RC0201FR-0727RL
27R
R302, R303
1
RC0402FR-07200KL
200K
R601
1
RC0402FR-071ML
1M
R602

IoT AgriFarm design files

The KiCad project lives in the sudo-junkie/IoT_AgriFarm repository on GitHub; these links point at the commit this page was built from.

IoT AgriFarm: common questions

What microcontroller does the IoT AgriFarm use?

The IoT AgriFarm is built around the RP2040, from the RP2040/RP2350 family.

How big is the IoT AgriFarm PCB?

The IoT AgriFarm measures 53.3 × 58.4 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the IoT AgriFarm?

120 components, from 57 distinct parts. The full bill of materials is listed on this page.

Where can I download the IoT AgriFarm design files?

From the sudo-junkie/IoT_AgriFarm repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the IoT AgriFarm design in my own project?

Yes, under the terms of its GPL-2.0 license, which sudo-junkie chose for the repository.

Can I test firmware for the IoT AgriFarm without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards