7 open source boards using the L78L05ABUTR
Real designs built with the L78L05ABUTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Spark inducer
30350n
233.3 × 128.5 mm104 parts2LCERN-OHL-W-2.022STM32
Fsk energymeter
luftaquila
90 × 74 mm79 parts2LCustom license13RP2040/RP2350
IoT AgriFarm
sudo-junkie
53.3 × 58.4 mm120 parts4LGPL-2.00STM32
RUDRAKINUXIS-Lite
RaviKachhwaha
78.5 × 55 mm100 parts4LNo license0STM32
Fsk energymeter ble-222
ducknine17
90 × 74 mm79 parts2LCustom license0STM32
Fsk energymeter
ducknine17
90 × 74 mm79 parts2LCustom license0STM32
Fsk energymeter ble
ducknine17
90 × 74 mm79 parts2LCustom license0
How designs wire the L78L05ABUTR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the L78L05ABUTR connects to, and the resistors, capacitors and other passives placed on it.
- The VOUT pin has a capacitor to GND on 7 of 7 designs, most often 1 µF (then 100 nF).
- The VIN pin has a decoupling capacitor on 7 of 7 designs, most often 330 nF (then 1 µF).
- The VOUT pin has a series resistor on 4 of 7 designs, most often 20 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VOUTpin 1 | Connected to: Another IC 57% · 5V 43% |
|
| GND_1pin 2 | Connected to: GND 100% | — |
| VINpin 3 | Connected to: VBUS 100% |
|
| GND_2pin 4 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Spark inducer by 30350n, Fsk energymeter by luftaquila, Fsk energymeter by ducknine17 and Fsk energymeter ble by ducknine17.
The L78L05ABUTR in open source designs
The gallery holds 7 open source boards using the L78L05ABUTR from 7 GitHub repositories; a typical one measures about 90 × 74 mm and carries around 79 components.
71% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Spark inducer by 30350n.
Parts used alongside the L78L05ABUTR
Microcontrollers on boards using the L78L05ABUTR
What boards using the L78L05ABUTR are built for
L78L05ABUTR: common questions
Where can I find a L78L05ABUTR reference design?
Each of the 7 boards on this page is a real design using the L78L05ABUTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the L78L05ABUTR VOUT pin connected?
The VOUT pin has a capacitor to GND on 7 of 7 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the L78L05ABUTR.
What decoupling capacitors do designs use on the L78L05ABUTR VIN pin?
The VIN pin has a decoupling capacitor on 7 of 7 designs, most often 330 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the L78L05ABUTR.
What parts are used alongside the L78L05ABUTR?
The AMC3311QDWERQ1, AMS1117-3.3, LM2675MX-5.0/NOPB, LM324DR and NCP51460SN33T1G appear in the most repositories here.
Which microcontrollers do boards using the L78L05ABUTR use?
Most are built on STM32 (5) and RP2040/RP2350 (1).
How big is a typical board using the L78L05ABUTR?
The median is 90 × 74 mm, and 71% are two-layer designs.
What is the most popular open source board using the L78L05ABUTR?
By GitHub stars, Spark inducer by 30350n, with 22 stars.
Can I simulate one of these boards using the L78L05ABUTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.