7 open source boards using the 8205A

Real designs built with the 8205A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the 8205A

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 8205A connects to, and the resistors, capacitors and other passives placed on it.

  • The S pins have a series capacitor on 5 of 7 designs, most often 100 nF.
  • The D pins have a series capacitor on 3 of 7 designs, most often 100 nF.
  • The D2 pin is left unconnected on 3 of 3 designs.
  • The S2 pin is tied to GND on 2 of 3 designs.
Spin 1, 3Connected to: Signal 50% · not connected 21% · GND 29%
  • Series capacitor on 71% · 100 nF (5)
Dpin 2, 5Connected to: Signal 57% · not connected 43%
  • Series capacitor on 43% · 100 nF (3)
S2pin 7Connected to: GND 67% · a signal 33%
D2pin 8Connected to: Not connected 100%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Main board by card-io-ecg, ESPFridge by Ehryk, APRS Bluetooth TNC tracker by hitov and The card by clouds56-mcu.

The 8205A in open source designs

The gallery holds 7 open source boards using the 8205A from 7 GitHub repositories; a typical one measures about 54 × 77.6 mm and carries around 71 components.

57% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.

The most starred is Main board by card-io-ecg.

Parts used alongside the 8205A

Microcontrollers on boards using the 8205A

What boards using the 8205A are built for

8205A: common questions

Where can I find a 8205A reference design?

Each of the 7 boards on this page is a real design using the 8205A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 8205A S pin connected?

The S pins have a series capacitor on 5 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the 8205A.

How is the 8205A D pin connected?

The D pins have a series capacitor on 3 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the 8205A.

How is the 8205A D2 pin connected?

The D2 pin is left unconnected on 3 of 3 designs. Counted from the KiCad layouts of 7 open source designs using the 8205A.

Which microcontrollers do boards using the 8205A use?

Most are built on ESP32 (4), RP2040/RP2350 (2) and AVR/Arduino (1).

How big is a typical board using the 8205A?

The median is 54 × 77.6 mm, and 57% are two-layer designs.

What is the most popular open source board using the 8205A?

By GitHub stars, Main board by card-io-ecg, with 22 stars.

Can I simulate one of these boards using the 8205A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part