6 open source boards using the AP2171WG-7
Real designs built with the AP2171WG-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Radio usb interface
SP8EBC
127 × 90 mm200 parts2LNo license3RP2040/RP2350
Rp569
kelu124
50 × 70 mm142 parts4LNo license3ESP32
Controller
sudo-junkie
127.9 × 33.6 mm101 parts4LNo license1EEE3088F project group 59
Khahulesingo144
80 × 55 mm55 parts2LNo license1RP2040/RP2350
IoT AgriFarm
sudo-junkie
53.3 × 58.4 mm120 parts4LGPL-2.00RP2040/RP2350
Rp569-routed
kelu124
50 × 70 mm142 parts4LNo license3
How designs wire the AP2171WG-7
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the AP2171WG-7 connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin is tied to 5V on 4 of 5 designs.
- The IN pin is tied to 5V on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: 5V 80% · a signal 20% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| INpin 5 | Connected to: 5V 60% · a signal 40% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rp569 by kelu124, Radio usb interface by SP8EBC, EEE3088F project group 59 by Khahulesingo144 and Controller by sudo-junkie.
The AP2171WG-7 in open source designs
The gallery holds 6 open source boards using the AP2171WG-7 from 5 GitHub repositories; a typical one measures about 66.7 × 64.2 mm and carries around 131 components.
67% use four copper layers or more, and 17% carry an open source license.
The most starred is Radio usb interface by SP8EBC.
Microcontrollers on boards using the AP2171WG-7
What boards using the AP2171WG-7 are built for
AP2171WG-7: common questions
Where can I find a AP2171WG-7 reference design?
Each of the 6 boards on this page is a real design using the AP2171WG-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AP2171WG-7 OUT pin connected?
The OUT pin is tied to 5V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the AP2171WG-7.
How is the AP2171WG-7 IN pin connected?
The IN pin is tied to 5V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the AP2171WG-7.
Which microcontrollers do boards using the AP2171WG-7 use?
Most are built on RP2040/RP2350 (3) and ESP32 (1).
How big is a typical board using the AP2171WG-7?
The median is 66.7 × 64.2 mm, and 33% are two-layer designs.
What is the most popular open source board using the AP2171WG-7?
By GitHub stars, Radio usb interface by SP8EBC, with 3 stars.
Can I simulate one of these boards using the AP2171WG-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.