6 open source boards using the GD25Q128EWIGR
Real designs built with the GD25Q128EWIGR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
LumaDD
xeno3dev
191.9 × 92.3 mm150 parts2LCC-BY-NC-4.00RP2040/RP2350
IoT AgriFarm
sudo-junkie
53.3 × 58.4 mm120 parts4LGPL-2.00STM32
T1s
hwkim3330
58.4 × 11.8 mm83 parts6LNo license0ESP32
ExoAnchor P4 V2.3B4
wxffxx
64.5 × 67 mm185 parts4LMIT0STM32
T1s panel
hwkim3330
70 × 81 mm83 parts6LNo license0ESP32
ExoAnchor P4 V2.3B6
wxffxx
64.5 × 67 mm185 parts6LMIT0
The GD25Q128EWIGR in open source designs
The gallery holds 6 open source boards using the GD25Q128EWIGR from 4 GitHub repositories; a typical one measures about 64.5 × 67 mm and carries around 135 components.
83% use four copper layers or more, and 50% carry an open source license.
The most starred is ExoAnchor P4 V2.3B6 by wxffxx.
Microcontrollers on boards using the GD25Q128EWIGR
What boards using the GD25Q128EWIGR are built for
GD25Q128EWIGR: common questions
Where can I find a GD25Q128EWIGR reference design?
Each of the 6 boards on this page is a real design using the GD25Q128EWIGR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the GD25Q128EWIGR use?
Most are built on ESP32 (3), STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the GD25Q128EWIGR?
The median is 64.5 × 67 mm, and 17% are two-layer designs.
What is the most popular open source board using the GD25Q128EWIGR?
By GitHub stars, ExoAnchor P4 V2.3B6 by wxffxx, with 0 stars.
Can I simulate one of these boards using the GD25Q128EWIGR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.