3 open source boards using the DW01A-G

Real designs built with the DW01A-G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The DW01A-G in open source designs

The gallery holds 3 open source boards using the DW01A-G from 3 GitHub repositories; a typical one measures about 53.3 × 58.4 mm and carries around 83 components.

67% use four copper layers or more, and 33% carry an open source license.

The most starred is IoT AgriFarm by sudo-junkie.

Microcontrollers on boards using the DW01A-G

DW01A-G: common questions

Where can I find a DW01A-G reference design?

Each of the 3 boards on this page is a real design using the DW01A-G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the DW01A-G use?

Most are built on AVR/Arduino (1), ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the DW01A-G?

The median is 53.3 × 58.4 mm, and 33% are two-layer designs.

What is the most popular open source board using the DW01A-G?

By GitHub stars, IoT AgriFarm by sudo-junkie, with 0 stars.

Can I simulate one of these boards using the DW01A-G before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part