Crab robot
triluongmh-byte·crab-robot·design/main.kicad_pcb
About the Crab robot PCB
Crab robot is an open source PCB design by triluongmh-byte, published on GitHub. It is a 4-layer board measuring 110 × 80 mm, with 113 components from 47 distinct parts.
Other key parts include the LM74800-Q1, TPS548B28RWWR, TPS54302DDCR, TPS2113APWR and PCA9685PW,118. By type, the board carries 15 ICs, 6 resistors, 5 transistors, 3 capacitors, 2 inductors and 1 fuse.
It belongs with the robotics & motion, displays & leds and power & battery designs in this gallery.
From the project
A compact, low-profile quadruped with eight SG90 servos, a LILYGO T-Display-S3, an eight-pixel WS2812 bar, an HC-SR04 sensor and a read-only Bambu A1 status display. No voice control, fan or headlight is fitted in V1.
A compact, low-profile quadruped with eight SG90 servos, a LILYGO T-Display-S3, an eight-pixel WS2812 bar, an HC-SR04 sensor and a read-only Bambu A1 status display. No voice control, fan or headlight is fitted in V1.
The handwired firmware is provided for use while waiting for the custom carrier PCB. The carrier design and firmware profile are retained. Builds and software/CAD checks do not establish that the physical robot can walk. No flashing, power-up, motor run or physical test has been performed by the automated workflow. The owner reports that printing is in progress; no completed…
Main components on the Crab robot
Crab robot bill of materials (BOM)
113 components, 47 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM74800-Q1 | WSON-12-1EP_3x3mm_P0.5mm_EP1.5x2.5mm | U1 |
| 1 | TPS548B28RWWR | TPS548B28_RWW0021A | U2 |
| 1 | TPS54302DDCR | SOT-23-6 | U3 |
| 1 | TPS2113APWR | TSSOP-8_3x3mm_P0.65mm | U4 |
| 1 | PCA9685PW,118 | TSSOP-28_4.4x9.7mm_P0.65mm | U5 |
| 1 | SN74LVC1G04DBVR | SOT-23-5 | U6 |
| 1 | SN74LVC8T245PWR | TSSOP-24_4.4x7.8mm_P0.65mm | U7 |
| 1 | ADS1115IDGSR | MSOP-10_3x3mm_P0.5mm | U8 |
| 1 | TMUX1511PWR | TSSOP-14_4.4x5mm_P0.65mm | U9 |
| 2 | SN74LVC1T45DBVR | SOT-23-6 | U10, U11 |
| 2 | TPS22919DCKR | SOT-363_SC-70-6 | U12, U13 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U14 |
| 1 | MCP1700T-3302E/TT | SOT-23 | U15 |
| 4 | CSD18540Q5B | TDSON-8-1 | Q1, Q2, Q4, Q5 |
| 1 | MMBT3906 | SOT-23 | Q3 |
| 4 | 22u | C_1210_3225Metric | C_AOUT1, C_AOUT2, C_IN3, C_IN4 |
| 12 | 100n | C_0603_1608Metric | C_BP_U1_10, C_BP_U6_5, C_BP_U7_1, C_BP_U9_14, C_BUF1, C_BUF2, C_MUX1, C_MUX2 +4 |
| 12 | 1u | C_0603_1608Metric | C_BP_U3_3, C_BP_U4_6, C_BP_U4_8, C_BP_U12_1, C_BP_U13_1, C_BP_U15_2, C_IN1, C_IN2 +4 |
| 3 | 1u | C_0402_1005Metric | C_HFB_U2_10, C_HFB_U2_21, C_HF_U2_21 |
| 1 | 10u | C_0805_2012Metric | C_MUX3 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | 47u | C_1210_3225Metric | C_OUT1, C_OUT2, C_OUT3, C_OUT4, C_OUT5, C_OUT6, C_OUT7, C_OUT8 |
| 1 | 20A 65V | Fuse_Littelfuse-NANO2-451_453 | F1 |
| 1 | J_CH0 | PinHeader_1x03_P2.54mm_Vertical | J_CH0 |
| 1 | J_CH1 | PinHeader_1x03_P2.54mm_Vertical | J_CH1 |
| 1 | J_CH2 | PinHeader_1x03_P2.54mm_Vertical | J_CH2 |
| 1 | J_CH3 | PinHeader_1x03_P2.54mm_Vertical | J_CH3 |
| 1 | J_CH4 | PinHeader_1x03_P2.54mm_Vertical | J_CH4 |
| 1 | J_CH5 | PinHeader_1x03_P2.54mm_Vertical | J_CH5 |
| 1 | J_CH6 | PinHeader_1x03_P2.54mm_Vertical | J_CH6 |
| 1 | J_CH7 | PinHeader_1x03_P2.54mm_Vertical | J_CH7 |
| 3 | 100k | R_0603_1608Metric | R_AEN1, R_AEN2, R_MUX1 |
| 2 | 73.2k | R_0603_1608Metric | R_AFB1, R_SFB1 |
| 12 | 10k | R_0603_1608Metric | R_AFB2, R_PD0, R_PD1, R_PD2, R_PD3, R_PD4, R_PD5, R_PD6 +4 |
| 2 | 5.1k | R_0603_1608Metric | R_CC1, R_CC2 |
| 1 | 2k | R_0603_1608Metric | R_ECHO1 |
| 1 | 3.3k | R_0603_1608Metric | R_ECHO2 |
| 1 | 24.9k | R_0603_1608Metric | R_MUX2 |
| 10 | 100 | R_0603_1608Metric | R_PWM0, R_PWM1, R_PWM2, R_PWM3, R_PWM4, R_PWM5, R_PWM6, R_PWM7 +2 |
| 1 | SMBJ8.5CA | D_SMB | D1 |
| 1 | 1uH 23A | L_Coilcraft_XAL1030-XXX | L1 |
| 1 | 6.8uH | L_Bourns_SRP7028A_7.3x6.6mm | L2 |
| 3 | 100n | C_0603_1608Metric | C1, C2, C3 |
| 2 | 47k | R_0603_1608Metric | R1, R2 |
| 1 | 330k | R_0603_1608Metric | R3 |
| 1 | 100k | R_0603_1608Metric | R4 |
| 1 | 75k | R_0603_1608Metric | R5 |
| 1 | 10k | R_0603_1608Metric | R6 |
Crab robot design files
The KiCad project lives in the triluongmh-byte/crab-robot repository on GitHub; these links point at the commit this page was built from.
- Layoutdesign/main.kicad_pcb
- Schematicdesign/main.kicad_sch
- BOMengineering/flywire-bom.csv
Crab robot: common questions
How big is the Crab robot PCB?
The Crab robot measures 110 × 80 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Crab robot?
113 components, from 47 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Crab robot design files?
From the triluongmh-byte/crab-robot repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Crab robot design in my own project?
The repository has no license, so all rights stay with triluongmh-byte. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k