Dial me spinner main
tyevco·dial-me-spinner·hardware/kicad/main/dial-me-spinner-main.kicad_pcb
About the Dial me spinner main PCB
Dial me spinner main is an open source Nordic nRF PCB design by tyevco, published on GitHub. It is a 4-layer board measuring 64 × 64 mm, with 187 components from 50 distinct parts.
Its main chip is the MDBT50Q-U1MV2, from the Nordic nRF family. Other key parts include the RT9080-33GJ5, TPS22917DBVR, W25Q128JVSIQ, USBLC6-2SC6 and TPS61040DBVR. By type, the board carries 89 capacitors, 50 diodes, 28 resistors, 14 ICs, 3 connectors and 1 crystal.
It belongs with the iot & wireless, displays & leds and power & battery designs in this gallery.
From the project
A Bluetooth dial spinner about 70 mm across, built on the nRF52840. A heavy, balanced stainless flywheel ring spins around a stationary centre that holds a colour OLED and a ring of 48 addressable RGB LEDs. You can press the whole top to click. A tiny actuator switches the ring e
A Bluetooth dial spinner about 70 mm across, built on the nRF52840. A heavy, balanced stainless flywheel ring spins around a stationary centre that holds a colour OLED and a ring of 48 addressable RGB LEDs. You can press the whole top to click. A tiny actuator switches the ring electronically between free spin and magnetic click detents, and it holds either position with zero power.
Main components on the Dial me spinner main
Dial me spinner main bill of materials (BOM)
187 components, 50 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RT9080-33GJ5 Richtek | SOT-23-5 | U1 |
| 2 | TPS22917DBVR Texas Instruments | SOT-23-6 | U2, U21 |
| 1 | MDBT50Q-U1MV2 Raytac | Raytac_MDBT50Q_UFL | U10 |
| 1 | W25Q128JVSIQ Winbond | SOIC-8_5.3x5.3mm_P1.27mm | U11 |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U12 |
| 1 | TPS61040DBVR Texas Instruments | SOT-23-5 | U20 |
| 1 | TMAG5273A2QDBVR Texas Instruments | SOT-23-6 | U30 |
| 1 | LIS2DW12TR STMicroelectronics | LGA-12_2x2mm_P0.5mm | U31 |
| 1 | TPD4E05U06DQAR Texas Instruments | USON-10_2.5x1.0mm_P0.5mm | U32 |
| 2 | DRV8837DSGR Texas Instruments | Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U40, U41 |
| 1 | DRV5032FADBZR Texas Instruments | SOT-23 | U42 |
| 1 | SN74LV1T34DBVR Texas Instruments | SOT-23-5 | U43 |
| 1 | SC-20S 32.768kHz 20PPM 9pF 32.768k 9pF Seiko Instruments | Crystal_SII_SC-20S_2.0x1.2mm | Y1 |
| 1 | SM12B-SRSS-TB(LF)(SN) LINK JST | JST_SH_SM12B-SRSS-TB_1x12-1MP_P1.00mm_Horizontal | J1 |
| 1 | AFC01-S30FCA-00 OLED_ZIF30 JUSHUO | JUSHUO_AFC01-S30FCA-00_1x30-1MP_P0.50mm_Horizontal | J20 |
| 1 | SM04B-SRSS-TB(LF)(SN) MOTOR JST | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J40 |
| 1 | PKMCS0909E4000-R1 Murata | Buzzer_Murata_PKMCS0909E4000-R1 | BZ1 |
| 1 | BAV99,215 BAV99 Nexperia | SOT-23 | D20 |
| 1 | B5819W SL B5819W Jiangsu Changjing (CJ) | D_SOD-123 | D21 |
| 48 | WS2812C-2020-V6 Worldsemi | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D101, D102, D103, D104, D105, D106, D107, D108 +40 |
Show 30 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SWPA3015S100MT 10u Sunlord | L_Sunlord_SWPA3015S | L20 |
| 3 | CL21A226MAQNNNE 22u Samsung Electro-Mechanics | C_0805_2012Metric | C1, C8, C9 |
| 3 | CL10A106MA8NRNC 10u/25V Samsung Electro-Mechanics | C_0603_1608Metric | C2, C6, C41 |
| 3 | CL10A106KP8NNNC 10u Samsung Electro-Mechanics | C_0603_1608Metric | C3, C10, C53 |
| 62 | CL05B104KO5NNNC 100n Samsung Electro-Mechanics | C_0402_1005Metric | C4, C5, C11, C15, C36, C43, C50, C52 +54 |
| 2 | 0402B102K500NT 1n/50V FH | C_0402_1005Metric | C7, C37 |
| 1 | CL10A475KO8NNNC 4.7u/16V Samsung Electro-Mechanics | C_0603_1608Metric | C12 |
| 2 | 0402CG120J500NT 12p C0G FH (Guangdong Fenghua) | C_0402_1005Metric | C13, C14 |
| 2 | 0402CG181J500NT 180p C0G FH (Guangdong Fenghua) | C_0402_1005Metric | C16, C17 |
| 2 | CL21A106KAYNNNE 10u/25V Samsung Electro-Mechanics | C_0805_2012Metric | C30, C74 |
| 1 | CL05B104KB54PNC 100n/50V Samsung Electro-Mechanics | C_0402_1005Metric | C31 |
| 1 | TAJA475K025RNJ 4.7u/25V Ta KYOCERA AVX | CP_EIA-3216-18_Kemet-A | C32 |
| 3 | CL05A105KA5NQNC 1u Samsung Electro-Mechanics | C_0402_1005Metric | C33, C34, C51 |
| 3 | CL21A475KAQNNNE 4.7u/25V Samsung Electro-Mechanics | C_0805_2012Metric | C35, C38, C39 |
| 1 | 0402CG330J500NT 33p C0G FH (Fenghua) | C_0402_1005Metric | C40 |
| 1 | 0402WGF2204TCE 2.2M UNI-ROYAL | R_0402_1005Metric | R1 |
| 3 | 0402WGF1004TCE 1M UNI-ROYAL | R_0402_1005Metric | R2, R20, R59 |
| 6 | 0402WGF1003TCE 100k UNI-ROYAL | R_0402_1005Metric | R3, R25, R41, R42, R56, R70 |
| 1 | RC0402FR-0768RL 68 YAGEO | R_0402_1005Metric | R4 |
| 3 | 0402WGF1002TCE 10k UNI-ROYAL | R_0402_1005Metric | R10, R11, R55 |
| 1 | FRC0402F4R70TS 4.7 FOJAN | R_0402_1005Metric | R12 |
| 1 | 0402WGF5603TCE 560k UNI-ROYAL | R_0402_1005Metric | R21 |
| 1 | 1206W4F510JT5E 51R 1/4W UNI-ROYAL | R_1206_3216Metric | R22 |
| 1 | RC0402DR-07499KL 499k 0.5% YAGEO | R_0402_1005Metric | R26 |
| 1 | RT0402BRD0752K3L 52.3k 0.1% YAGEO | R_0402_1005Metric | R27 |
| 1 | 0402WGF2200TCE 220 UNI-ROYAL | R_0402_1005Metric | R40 |
| 1 | 0402WGF0000TCE 0 UNI-ROYAL | R_0402_1005Metric | R43 |
| 4 | 0402WGF4701TCE 4.7k UNI-ROYAL | R_0402_1005Metric | R50, R51, R53, R54 |
| 1 | 0402WGF4702TCE 47k UNI-ROYAL | R_0402_1005Metric | R52 |
| 2 | 0402WGF4700TCE 470 UNI-ROYAL | R_0402_1005Metric | R57, R58 |
Dial me spinner main design files
The KiCad project lives in the tyevco/dial-me-spinner repository on GitHub; these links point at the commit this page was built from.
Dial me spinner main: common questions
What microcontroller does the Dial me spinner main use?
The Dial me spinner main is built around the MDBT50Q-U1MV2, from the Nordic nRF family.
How big is the Dial me spinner main PCB?
The Dial me spinner main measures 64 × 64 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Dial me spinner main?
187 components, from 50 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dial me spinner main design files?
From the tyevco/dial-me-spinner repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Dial me spinner main design in my own project?
The repository has no license, so all rights stay with tyevco. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Dial me spinner main without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
More boards in dial-me-spinner
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381