8 open source boards using the TPS61040DBVR

Real designs built with the TPS61040DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the TPS61040DBVR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS61040DBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN pin has a capacitor to GND on 5 of 5 designs, most often 4.7 µF (then 10 µF).
  • The SW pin has a inductor on 4 of 5 designs, most often 10 µH (then 4.7 µH).
  • The FB pin has a resistor to GND on 4 of 5 designs, most often 205 kΩ (then 200 kΩ).
  • The EN pin has a capacitor to GND on 4 of 5 designs, most often 4.7 µF (then 10 µF).
SWpin 1Connected to: Signal 80% · AVDD_SW 20%
  • Inductor on 80% · 10 µH (3), 4.7 µH (1)
GNDpin 2Connected to: GND 100%
FBpin 3Connected to: Signal 80% · AVDD_FB 20%
  • Resistor to GND on 80% · 205 kΩ (1), 200 kΩ (1), 27 kΩ (1)
  • Pull-up to 12V on 40% · 1.8 MΩ (1), 499 kΩ (1)
  • Capacitor to the supply on 40% · 22 pF (1), 33 pF (1)
  • Series capacitor on 40% · 10 pF (1), 22 pF (1)
  • Series resistor on 40% · 1.6 MΩ (1), 100 kΩ (1)
ENpin 4Connected to: Signal 80% · 5V 20%
  • Capacitor to GND on 80% · 4.7 µF (3), 10 µF (1)
  • Inductor on 80% · 10 µH (4)
VINpin 5Connected to: Signal 60% · 5V 40%
  • Capacitor to GND on 100% · 4.7 µF (4), 10 µF (1)
  • Inductor on 80% · 10 µH (4)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Cm4 motherboard by Twisted-Fields, Scart-Megadrive-2-12v cable by KabukiFlux, Rpi dsi iphone4 by ixoo and Lcd board by Novin3dp.

The TPS61040DBVR in open source designs

The gallery holds 8 open source boards using the TPS61040DBVR from 6 GitHub repositories; a typical one measures about 68 × 50 mm and carries around 115 components.

57% are two-layer designs, the rest use four layers or more, and 13% carry an open source license.

The most starred is Cm4 motherboard by Twisted-Fields.

Microcontrollers on boards using the TPS61040DBVR

TPS61040DBVR: common questions

Where can I find a TPS61040DBVR reference design?

Each of the 8 boards on this page is a real design using the TPS61040DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS61040DBVR VIN pin connected?

The VIN pin has a capacitor to GND on 5 of 5 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the TPS61040DBVR.

How is the TPS61040DBVR SW pin connected?

The SW pin has a inductor on 4 of 5 designs, most often 10 µH (then 4.7 µH). Counted from the KiCad layouts of 5 open source designs using the TPS61040DBVR.

What resistor goes on the TPS61040DBVR FB pin?

The FB pin has a resistor to GND on 4 of 5 designs, most often 205 kΩ (then 200 kΩ). Counted from the KiCad layouts of 5 open source designs using the TPS61040DBVR.

What parts are used alongside the TPS61040DBVR?

The ADS1115IDGSR, CA-IS3050G, ET6226M, FJ5461AH and FT231XS-R appear in the most repositories here.

Which microcontrollers do boards using the TPS61040DBVR use?

Most are built on Raspberry Pi (2), STM32 (2) and Nordic nRF (1).

How big is a typical board using the TPS61040DBVR?

The median is 68 × 50 mm, and 57% are two-layer designs.

What is the most popular open source board using the TPS61040DBVR?

By GitHub stars, Cm4 motherboard by Twisted-Fields, with 81 stars.

Can I simulate one of these boards using the TPS61040DBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part