12 open source boards using the SN74LVC1T45DRLR

Real designs built with the SN74LVC1T45DRLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the SN74LVC1T45DRLR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74LVC1T45DRLR connects to, and the resistors, capacitors and other passives placed on it.

  • The B pin has a series resistor on 3 of 5 designs, most often 27 Ω (then 100 Ω).
  • The VCCB pin has a decoupling capacitor on 3 of 5 designs, most often 4.7 µF (then 10 µF).
  • The DIR pin is tied to 3.3V on 3 of 5 designs.
  • The VCCA pin has a decoupling capacitor on 2 of 5 designs, most often 10 µF (then 100 nF).
VCCApin 1Connected to: VCC 100%
  • Decoupling capacitor on 40% · 10 µF (1), 100 nF (1)
GNDpin 2Connected to: GND 100%
Bpin 4Connected to: Signal 100%
  • Series resistor on 60% · 27 Ω (2), 100 Ω (1)
DIRpin 5Connected to: 3.3V 60% · not connected 20% · a signal 20%
VCCBpin 6Connected to: 5V 80% · a signal 20%
  • Decoupling capacitor on 60% · 4.7 µF (1), 10 µF (1), 100 nF (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Barghoot by AlaaSaadAbdo, Pcb by 0xCB-dev, BosonFrameGrabber by gregdavill and Gemini by 0xCB-dev.

The SN74LVC1T45DRLR in open source designs

The gallery holds 12 open source boards using the SN74LVC1T45DRLR from 6 GitHub repositories; a typical one measures about 137 × 95.5 mm and carries around 141 components.

55% use four copper layers or more, and 17% carry an open source license.

The most starred is Untitled by AlaaSaadAbdo.

Microcontrollers on boards using the SN74LVC1T45DRLR

What boards using the SN74LVC1T45DRLR are built for

SN74LVC1T45DRLR: common questions

Where can I find a SN74LVC1T45DRLR reference design?

Each of the 12 boards on this page is a real design using the SN74LVC1T45DRLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the SN74LVC1T45DRLR B pin?

The B pin has a series resistor on 3 of 5 designs, most often 27 Ω (then 100 Ω). Counted from the KiCad layouts of 5 open source designs using the SN74LVC1T45DRLR.

What decoupling capacitors do designs use on the SN74LVC1T45DRLR VCCB pin?

The VCCB pin has a decoupling capacitor on 3 of 5 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the SN74LVC1T45DRLR.

How is the SN74LVC1T45DRLR DIR pin connected?

The DIR pin is tied to 3.3V on 3 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the SN74LVC1T45DRLR.

What parts are used alongside the SN74LVC1T45DRLR?

The USBLC6-2P6, TLV75533PDQNR, RP2040, SC0914(13) and W25Q128JVPIQ appear in the most repositories here.

Which microcontrollers do boards using the SN74LVC1T45DRLR use?

Most are built on RP2040/RP2350 (7), FPGA (1) and Microchip SAM (1).

How big is a typical board using the SN74LVC1T45DRLR?

The median is 137 × 95.5 mm, and 45% are two-layer designs.

What is the most popular open source board using the SN74LVC1T45DRLR?

By GitHub stars, Untitled by AlaaSaadAbdo, with 189 stars.

Can I simulate one of these boards using the SN74LVC1T45DRLR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part