12 open source boards using the W25Q32JVUUIQ
Real designs built with the W25Q32JVUUIQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Pcb
0xCB-dev
62 × 62 mm114 parts4LCustom license61RP2040/RP2350
Multiprobe
picolemon
50 × 50 mm89 parts4LMIT13RP2040/RP2350
HALPI2-hardware
hatlabs
187 × 109 mm541 parts6LCustom license9RP2040/RP2350
Pcb
0xCB-dev
305.1 × 95.5 mm228 parts2LCustom license5HEXBERRY-V-20Q100-0.91
logitiles
65 × 40 mm186 parts4LCERN-OHL-S-2.04RP2040/RP2350
Skinny Chameleon
TweetyDaBird
225.5 × 93 mm180 parts2LNo license3RP2040/RP2350
RefleXion X65
TweetyDaBird
133.4 × 117.1 mm168 parts2LNo license0RP2040/RP2350
Bluebuzz rm2
sequoia-hope
26 × 56.8 mm104 parts6LNo license0RP2040/RP2350
Dragonfly v0 1
aravindjayan
40 × 59.2 mm76 parts2LNo license0RP2040/RP2350
Pcb panel
0xCB-dev
137 × 141 mm114 parts4LCustom license61RP2040/RP2350
Pcb rails
0xCB-dev
305.1 × 111.5 mm228 parts2LCustom license5RP2040/RP2350
Dragonfly v0-1 Ribs
aravindjayan
52 × 71.2 mm76 parts2LNo license0
How designs wire the W25Q32JVUUIQ
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the W25Q32JVUUIQ connects to, and the resistors, capacitors and other passives placed on it.
- The CS pin has a series resistor on 9 of 9 designs, most often 1 kΩ (then 0 Ω).
- The VCC pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF).
- The CS pin has a pull-up to 3.3V on 5 of 9 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CSpin 1 | Connected to: The microcontroller 89% |
|
| GNDpin 4, 9, 10 | Connected to: GND 81% · not connected 19% | — |
| VCCpin 8 | Connected to: 3.3V 100% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pcb by 0xCB-dev, Multiprobe by picolemon, HALPI2-hardware by hatlabs and Pcb by 0xCB-dev.
The W25Q32JVUUIQ in open source designs
The gallery holds 12 open source boards using the W25Q32JVUUIQ from 9 GitHub repositories; a typical one measures about 99.2 × 82.1 mm and carries around 141 components.
50% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is Pcb panel by 0xCB-dev.
Parts used alongside the W25Q32JVUUIQ
Microcontrollers on boards using the W25Q32JVUUIQ
What boards using the W25Q32JVUUIQ are built for
W25Q32JVUUIQ: common questions
Where can I find a W25Q32JVUUIQ reference design?
Each of the 12 boards on this page is a real design using the W25Q32JVUUIQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the W25Q32JVUUIQ CS pin?
The CS pin has a series resistor on 9 of 9 designs, most often 1 kΩ (then 0 Ω). Counted from the KiCad layouts of 9 open source designs using the W25Q32JVUUIQ.
What decoupling capacitors do designs use on the W25Q32JVUUIQ VCC pin?
The VCC pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the W25Q32JVUUIQ.
What parts are used alongside the W25Q32JVUUIQ?
The RP2040, USBLC6-2P6, SN74LV1T34DBV, SN74LVC1T45DRLR and SPX3819M5-L-3-3 appear in the most repositories here.
Which microcontrollers do boards using the W25Q32JVUUIQ use?
Most are built on RP2040/RP2350 (11).
How big is a typical board using the W25Q32JVUUIQ?
The median is 99.2 × 82.1 mm, and 50% are two-layer designs.
What is the most popular open source board using the W25Q32JVUUIQ?
By GitHub stars, Pcb panel by 0xCB-dev, with 61 stars.
Can I simulate one of these boards using the W25Q32JVUUIQ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.