7 open source boards using the 3V3
Real designs built with the 3V3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515STM32
FLIGHT-CONTROLLER-PUSHPAK--2026
iamneerajverma001
40 × 40 mm74 parts4LMIT1ESP32
MiAM PAMI 2024 DC
14chanwa
69.8 × 96.8 mm31 parts2LNo license0ESP32
MiAM PAMI V2 StepperMainBoard
14chanwa
64 × 95 mm28 parts2LNo license0ESP32
MiAM PAMI V3 DC
14chanwa
62 × 95 mm26 parts2LNo license0ESP32
MiAM ESP32
14chanwa
64.5 × 52.3 mm18 parts2LNo license0ESP32
MiAM PAMI PowerShield
14chanwa
28.7 × 54.7 mm8 parts2LNo license0
The 3V3 in open source designs
The gallery holds 7 open source boards using the 3V3 from 3 GitHub repositories; a typical one measures about 64 × 80 mm and carries around 28 components.
71% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.
The most starred is Lens by ervanalb.
What boards using the 3V3 are built for
3V3: common questions
Where can I find a 3V3 reference design?
Each of the 7 boards on this page is a real design using the 3V3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 3V3 use?
Most are built on ESP32 (5), PIC (1) and STM32 (1).
How big is a typical board using the 3V3?
The median is 64 × 80 mm, and 71% are two-layer designs.
What is the most popular open source board using the 3V3?
By GitHub stars, Lens by ervanalb, with 515 stars.
Can I simulate one of these boards using the 3V3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.