7 open source boards using the TPS565242DRLR

Real designs built with the TPS565242DRLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the TPS565242DRLR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS565242DRLR connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 100 nF).
  • The SW pin has a inductor on 5 of 5 designs, most often 1.5 µH (then 2.2 µH).
  • The FB pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ (then 30 kΩ).
  • The FB pin has a pull-up to 3.3V on 4 of 5 designs, most often 45 kΩ (then 220 kΩ).
VINpin 1Connected to: 5V 60% · a signal 40%
  • Decoupling capacitor on 100% · 10 µF (7), 100 nF (5), 22 µF (3)
SWpin 2Connected to: Signal 100%
  • Inductor on 100% · 1.5 µH (3), 2.2 µH (1), 3.3 µH (1)
GNDpin 3Connected to: GND 100%
AGNDpin 4Connected to: GND 100%
ENpin 5Connected to: 5V 80% · a signal 20%
FBpin 6Connected to: Signal 100%
  • Resistor to GND on 100% · 10 kΩ (3), 30 kΩ (2)
  • Pull-up to 3.3V on 80% · 45 kΩ (3), 220 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LinHT by M17-Project, SUMEC MK IV by bismarx-v1, SUMEC MK IV by bismarx-v1 and ControlledWallSocket rounded nyoHoles by bismarx-v1.

The TPS565242DRLR in open source designs

The gallery holds 7 open source boards using the TPS565242DRLR from 5 GitHub repositories; a typical one measures about 80 × 45 mm and carries around 84 components.

71% use four copper layers or more, and 0% carry an open source license.

The most starred is LinHT by M17-Project.

Microcontrollers on boards using the TPS565242DRLR

What boards using the TPS565242DRLR are built for

TPS565242DRLR: common questions

Where can I find a TPS565242DRLR reference design?

Each of the 7 boards on this page is a real design using the TPS565242DRLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TPS565242DRLR VIN pin?

The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the TPS565242DRLR.

How is the TPS565242DRLR SW pin connected?

The SW pin has a inductor on 5 of 5 designs, most often 1.5 µH (then 2.2 µH). Counted from the KiCad layouts of 5 open source designs using the TPS565242DRLR.

What resistor goes on the TPS565242DRLR FB pin?

The FB pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ (then 30 kΩ). Counted from the KiCad layouts of 5 open source designs using the TPS565242DRLR.

What parts are used alongside the TPS565242DRLR?

The ESP32-S3-WROOM-1, USBLC6-2SC6, DRV8874PWPR, TPS62133 and TSOP382xx appear in the most repositories here.

Which microcontrollers do boards using the TPS565242DRLR use?

Most are built on ESP32 (5) and AVR/Arduino (1).

How big is a typical board using the TPS565242DRLR?

The median is 80 × 45 mm, and 29% are two-layer designs.

What is the most popular open source board using the TPS565242DRLR?

By GitHub stars, LinHT by M17-Project, with 218 stars.

Can I simulate one of these boards using the TPS565242DRLR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part