IOT-project
datnguyenhcmut·IOT-project·hardware/OpenAirStation-V0-Draft/OpenAirScope.kicad_pcb
About the IOT-project PCB
IOT-project is an open source ESP32 PCB design by datnguyenhcmut, published on GitHub under the MIT license. It is a 4-layer board measuring 100 × 75 mm, with 247 components from 70 distinct parts.
Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the MCP73871-2CAI/ML, TPD2E2U06DCKR, TPS61023DRLT, LD39150DT33-R and STM32H743ZIT6. By type, the board carries 91 resistors, 89 capacitors, 16 diodes, 15 ICs, 13 connectors and 7 transistors.
It belongs with the iot & wireless designs in this gallery.
Main components on the IOT-project
IOT-project bill of materials (BOM)
247 components, 70 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73871-2CAI/ML MCP73871 | QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias | U1 |
| 1 | TPD2E2U06DCKR TPD2E2U06DCK | SOT-323_SC-70 | U2 |
| 1 | TPS61023DRLT | SOT50P160X60-6N | U3 |
| 1 | LD39150DT33-R | TO-252-3_TabPin2 | U4 |
| 1 | STM32H743ZIT6 STM32H743ZITx | LQFP-144_20x20mm_P0.5mm | U5 |
| 1 | M95256-WMN6P | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | ESP32-C3-WROOM-02-N4 ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U7 |
| 1 | RAK3172-8-SM-NI RAK3172 | RAK3172 | U8 |
| 1 | SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | MAX3485 | SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | SGP41-D-R4 | XDCR_SGP41-D-R4 | U11 |
| 1 | SCD40-D-R2 | Sensirion_SCD4x-1EP_10.1x10.1mm_P1.25mm_EP4.8x4.8mm | U12 |
| 1 | LTR-303ALS-01 | Lite-On_LTR-303ALS-01 | U13 |
| 1 | EMIF06-MSD02N16 CM1624 | OnSemi_UDFN-16-1EP_1.35x3.3mm_P0.4mm_EP0.4x2.8mm | U14 |
| 1 | DS3231M+TRL DS3231M | SOIC-16W_7.5x10.3mm_P1.27mm | U15 |
| 7 | BC817 | SOT-23 | Q1, Q3, Q4, Q5, Q6, Q7, Q8 |
| 1 | USB4110-GF-A USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4110 | J1 |
| 1 | S2B-PH-K-S S2B-PH-K-S_LF__SN_ | JST_S2B-PH-K-S_LF__SN_ | J2 |
| 1 | STDC14 Conn_ST_STDC14 | PinHeader_2x07_P1.27mm_Vertical | J3 |
| 3 | X6511WV-08H-C60D30 Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J4, J5, J14 |
Show 50 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RFPC-SMA27-F | GRADCONN_RFPC-SMA27-F | J6 |
| 2 | PZ254V-11-07P Conn_01x07_Pin | PinHeader_1x07_P2.54mm_Vertical | J7, J13 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_RND_205-00045_1x02_P5.00mm_Horizontal | J8, J9 |
| 1 | S5B-ZR S5B-ZR_LF__SN_ | JST_S5B-ZR_LF__SN_ | J10 |
| 1 | 693072010801 Micro_SD_Card | microSD_HC_Wuerth_693072010801 | J11 |
| 1 | ABT-410-RC Buzzer | MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 2 | SPH0645LM4H-B | Knowles_SPH0645LM4H-6_3.5x2.65mm | MK1, MK2 |
| 1 | 1825910-6 TE Connectivity ALCOSWITCH Switches | Switch_Tactile_THT_6x6mm | S1 |
| 3 | TC-1102-C-S-B SW_Push | SW_PUSH_6mm_H13mm | SW3, SW4, SW5 |
| 1 | ERT-J1VR103J 10k | R_0603_1608Metric | TH1 |
| 1 | ECS-.327-12.5-34B-TR ECS-_327-12_5-34B-TR ECS Inc. | SMD-2_3.2x1.5mm | XTAL1 |
| 2 | PTVS5V0Z1USKYL | Nexperia_DSN1608-2_1.6x0.8mm | D1, D5 |
| 9 | 150060RS75000 LED | LED_0603_1608Metric | D2, D3, D4, D9, D10, D11, D12, D13 +1 |
| 1 | PESD1CAN,215 PESD1CAN_215 Nexperia USA Inc. | SOT-23-3 | D6 |
| 1 | SM712-02HTG SM712_SOT23 | SOT-23 | D7 |
| 3 | ESD9B3.3ST5G | D_SOD-923 | D15, D16, D17 |
| 4 | BLM18AG601BH1D FerriteBead | L_0603_1608Metric | FB1, FB2, FB3, FB4 |
| 1 | XEL4030-102MEC | IND_XEL4030-102MEC | L1 |
| 1 | RC0603JR-070RL L | L_0603_1608Metric | L2 |
| 1 | XEL4030-102MEC WE-SL2 | WE-SL2 | L3 |
| 14 | CGA5L2X7R1E105K160AA 1uF | C_1206_3216Metric | C1, C5, C7, C21, C38, C50, C63, C68 +6 |
| 38 | CC0603KRX7R8BB104 100nF | C_0603_1608Metric | C2, C14, C17, C22, C23, C24, C25, C26 +30 |
| 5 | CL31B106KAHNNNE 10uF | C_1206_3216Metric | C3, C16, C19, C47, C57 |
| 7 | GRM21BC71E475KE11L 4.7uF | C_0805_2012Metric | C4, C6, C8, C12, C20, C48, C60 |
| 2 | 0603YC470KAT2A 47pF | C_0603_1608Metric | C9, C10 |
| 1 | CC0805KRX7R9BB222 2.2nF | C_0805_2012Metric | C11 |
| 2 | CL31A226MOCLNNC 22uF | C_1206_3216Metric | C15, C18 |
| 5 | CC0603KRX7R8BB102 1nF | C_0603_1608Metric | C37, C40, C84, C90, C92 |
| 2 | C1206C225M3RECAUTO 2.2uF | C_1206_3216Metric | C43, C44 |
| 2 | 06035A100K4T4A 10pF | C_0603_1608Metric | C45, C46 |
| 2 | ~ | C_0402_1005Metric | C53, C54 |
| 1 | 100nF | C_0603_1608Metric | C56 |
| 2 | 06033C101MAT2A 100pF | C_0603_1608Metric | C59, C62 |
| 2 | CC0603KRX7R9BB201 200pF | C_0603_1608Metric | C72, C74 |
| 1 | GXT188R61C106KE13D 10uF | C_0603_1608Metric | C75 |
| 3 | C0603X223K5RECAUTO 22nF | C_0603_1608Metric | C83, C89, C91 |
| 11 | ERA-3AEB102V 1k | R_0603_1608Metric | R1, R2, R3, R4, R54, R64, R65, R66 +3 |
| 1 | RN73A1J5K0FTD 5k | R_0603_1608Metric | R5 |
| 2 | ERJ-3EKF1000V 100R | R_0603_1608Metric | R6, R19 |
| 2 | RC0603FR-075K1L 5.1k | R_0603_1608Metric | R7, R8 |
| 1 | RC0603FR-07732KL 732k | R_0603_1608Metric | R9 |
| 1 | ERJ-3EKF1003V 100k | R_0603_1608Metric | R10 |
| 22 | RC0603JR-070RL 0R | R_0603_1608Metric | R11, R14, R15, R16, R17, R18, R21, R22 +14 |
| 20 | RC0603FR-0710KL 10k | R_0603_1608Metric | R12, R13, R20, R27, R28, R29, R30, R33 +12 |
| 2 | ERA-3AEB121V 120R | R_0603_1608Metric | R32, R40 |
| 1 | RC0603FR-134R7L 4R7 | R_0603_1608Metric | R44 |
| 2 | RC0603JR-0751RL 51R | R_0603_1608Metric | R50, R51 |
| 14 | ERJ-3EKF4701V 4.7k | R_0603_1608Metric | R52, R57, R58, R59, R60, R70, R71, R72 +6 |
| 6 | RC0603FR-0747KL 47k | R_0603_1608Metric | R76, R77, R78, R79, R80, R81 |
| 6 | RC0603FR-0722KL 22k | R_0603_1608Metric | R82, R84, R89, R91, R92, R94 |
IOT-project design files
The KiCad project lives in the datnguyenhcmut/IOT-project repository on GitHub; these links point at the commit this page was built from.
IOT-project: common questions
What microcontroller does the IOT-project use?
The IOT-project is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.
How big is the IOT-project PCB?
The IOT-project measures 100 × 75 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the IOT-project?
247 components, from 70 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IOT-project design files?
From the datnguyenhcmut/IOT-project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IOT-project design in my own project?
Yes, under the terms of its MIT license, which datnguyenhcmut chose for the repository.
Can I test firmware for the IOT-project without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k