9 open source boards using the EMIF06-MSD02N16
Real designs built with the EMIF06-MSD02N16, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ILDAWaveX16
stanleyondrus
52.8 × 55 mm94 parts2LNo license43ESP32
OpenAirScope
emertcakir
100 × 75 mm247 parts4LMIT26STM32
CanardBoard
waterloo-rocketry
100 × 70 mm244 parts6LGPL-3.015STM32
Topiary-TrimBot
griffinross2
190.5 × 160 mm251 parts4LGPL-3.02Hw udsp card
crsknr
60 × 30 mm211 parts6LGPL-3.02STM32
Aems
vigneshuw
200 × 115 mm266 parts8LCustom license1ESP32
IOT-project
datnguyenhcmut
100 × 75 mm247 parts4LMIT0ESP32
Dash
sundevilmotorsports
130 × 81 mm105 parts4LNo license2ESP32
SDM26 SteeringWheel V1.1
sundevilmotorsports
182.9 × 134 mm82 parts4LNo license2
How designs wire the EMIF06-MSD02N16
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the EMIF06-MSD02N16 connects to, and the resistors, capacitors and other passives placed on it.
- The RDAT3_GND pin is left unconnected on 5 of 8 designs (a signal on 2).
- The VCC pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF (then 1 µF).
- The RDATA_VCC pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RDAT3_GNDpin 2 | Connected to: Not connected 63% · a signal 25% | — |
| VCCpin 15 | Connected to: 3.3V 75% · a signal 25% |
|
| RDATA_VCCpin 16 | Connected to: 3.3V 75% · a signal 25% |
|
| GNDpin 17 | Connected to: GND 100% | — |
13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ILDAWaveX16 by stanleyondrus, OpenAirScope by emertcakir, CanardBoard by waterloo-rocketry and Hw udsp card by crsknr.
The EMIF06-MSD02N16 in open source designs
The gallery holds 9 open source boards using the EMIF06-MSD02N16 from 8 GitHub repositories; a typical one measures about 100 × 75 mm and carries around 244 components.
89% use four copper layers or more, and 56% carry an open source license.
The most starred is ILDAWaveX16 by stanleyondrus.
Parts used alongside the EMIF06-MSD02N16
What boards using the EMIF06-MSD02N16 are built for
EMIF06-MSD02N16: common questions
Where can I find a EMIF06-MSD02N16 reference design?
Each of the 9 boards on this page is a real design using the EMIF06-MSD02N16. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the EMIF06-MSD02N16 RDAT3_GND pin connected?
The RDAT3_GND pin is left unconnected on 5 of 8 designs (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the EMIF06-MSD02N16.
What decoupling capacitors do designs use on the EMIF06-MSD02N16 VCC pin?
The VCC pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the EMIF06-MSD02N16.
What decoupling capacitors do designs use on the EMIF06-MSD02N16 RDATA_VCC pin?
The RDATA_VCC pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the EMIF06-MSD02N16.
What parts are used alongside the EMIF06-MSD02N16?
The SN65HVD230, USBLC6-2SC6, DS3231M+TRL, ESP32-C3-WROOM-02-N4 and LD39150DT33-R appear in the most repositories here.
Which microcontrollers do boards using the EMIF06-MSD02N16 use?
Most are built on ESP32 (5) and STM32 (3).
How big is a typical board using the EMIF06-MSD02N16?
The median is 100 × 75 mm, and 11% are two-layer designs.
What is the most popular open source board using the EMIF06-MSD02N16?
By GitHub stars, ILDAWaveX16 by stanleyondrus, with 43 stars.
Can I simulate one of these boards using the EMIF06-MSD02N16 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.