9 open source boards using the TPD2E2U06DCKR
Real designs built with the TPD2E2U06DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
OpenAirScope
emertcakir
100 × 75 mm247 parts4LMIT26STM32
Interface board
BetzDrive
70 × 70 mm126 parts4LCERN-OHL-P-2.05ESP32
IOT-project
datnguyenhcmut
100 × 75 mm247 parts4LMIT0ESP32
Usb scoring platform
AndrewCraswell
165 × 100 mm223 parts4LMIT0STM32
Snake pcb business card
alex1324575
85.6 × 54 mm126 parts2LNo license0ESP32
MagMouse
sbarisic
60 × 95 mm273 parts4LCustom license2ESP32
Main
sbarisic
80 × 125 mm207 parts4LCustom license2ESP32
Virtual scoring box
AndrewCraswell
120 × 85 mm142 parts4LMIT0ESP32
Lower
sbarisic
70 × 100 mm92 parts2LCustom license2
How designs wire the TPD2E2U06DCKR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TPD2E2U06DCKR connects to, and the resistors, capacitors and other passives placed on it.
- The A pin is tied to GND on 5 of 6 designs.
- The K pins have a series resistor on 3 of 6 designs, most often 0 Ω (then 120 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Kpin 1, 2 | Connected to: A connector 100% |
|
| Apin 3 | Connected to: GND 83% · a signal 17% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenAirScope by emertcakir, Interface board by BetzDrive, MagMouse by sbarisic and Snake pcb business card by alex1324575.
The TPD2E2U06DCKR in open source designs
The gallery holds 9 open source boards using the TPD2E2U06DCKR from 6 GitHub repositories; a typical one measures about 85.6 × 85 mm and carries around 207 components.
78% use four copper layers or more, and 56% carry an open source license.
The most starred is OpenAirScope by emertcakir.
Parts used alongside the TPD2E2U06DCKR
What boards using the TPD2E2U06DCKR are built for
TPD2E2U06DCKR: common questions
Where can I find a TPD2E2U06DCKR reference design?
Each of the 9 boards on this page is a real design using the TPD2E2U06DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPD2E2U06DCKR A pin connected?
The A pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TPD2E2U06DCKR.
What resistor goes on the TPD2E2U06DCKR K pin?
The K pins have a series resistor on 3 of 6 designs, most often 0 Ω (then 120 Ω). Counted from the KiCad layouts of 6 open source designs using the TPD2E2U06DCKR.
What parts are used alongside the TPD2E2U06DCKR?
The DS3231M+TRL, EMIF06-MSD02N16, ESP32-C3-WROOM-02-N4, LD39150DT33-R and LTR-303ALS-01 appear in the most repositories here.
Which microcontrollers do boards using the TPD2E2U06DCKR use?
Most are built on ESP32 (7) and STM32 (2).
How big is a typical board using the TPD2E2U06DCKR?
The median is 85.6 × 85 mm, and 22% are two-layer designs.
What is the most popular open source board using the TPD2E2U06DCKR?
By GitHub stars, OpenAirScope by emertcakir, with 26 stars.
Can I simulate one of these boards using the TPD2E2U06DCKR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.