Teebeutel-Hardware

entropia·Teebeutel-Hardware

Teebeutel-Hardware PCB layout, top view — open source ESP32 board by entropia

About the Teebeutel-Hardware PCB

Teebeutel-Hardware is an open source ESP32 PCB design by entropia, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 72 × 121 mm, with 152 components from 46 distinct parts.

Its main chip is the ESP32-WROOM-32E(16MB), from the ESP32 family. Other key parts include the PCA9539PW, TXB0104RUT, RM-V8XXC_TR1, PPSI262 and SGP30. By type, the board carries 50 capacitors, 42 resistors, 20 diodes, 14 ICs, 10 connectors and 9 transistors.

It belongs with the wearables, displays & leds and sensors designs in this gallery.

From the project

Teebeutel (eng. Teabag) is an electronic, Entropia themed con-badge for the GPN20, featuring an ESP32 microprocessor running micropython. You can tinker with its various sensors, build your own custom expansions, render beautiful animations on the 128x128px oled or simply enjoy it as the colourful badge it is.

An (experimental) ESP32-dev-board in the shape of the Entropia logo.

Head over to the wiki for more information.

Main components on the Teebeutel-Hardware

Teebeutel-Hardware bill of materials (BOM)

152 components, 46 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
PCA9539PW
U1
1
TXB0104RUT
U2
1
RM-V8XXC_TR1
RM-V8xxC_TR1
U3
1
PPSI262
U4
1
SGP30
U5
1
TLV70018_SOT23-5
U6
1
CH340C
U7
1
ESP32-WROOM-32E(16MB)
U8
1
LIS2DE12
U9
1
SDB628
U10
1
MCP73831-2-OT
U11
1
TLV62569DBVR
U12
2
SRV05-4
U13, U14
1
Motor_DC
M1
9
AO3400
Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +1
1
CONN_01X30_FEMALE
Conn_01x30_Female
J1
1
Battery
J2
2
RJ45_SHIELDED
RJ45_Shielded
J3, J4
1
CONN_01X06_FEMALE
Conn_01x06_Female
J5
1
CONN_01X06_FEMALE
Conn_01x06_Female
J6
Show 26 more
QtyPartRefs
1
Micro_SD_Card
J7
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J8
1
CONN_01X10_FEMALE
Conn_01x10_Female
J9
1
CONN_01X10_FEMALE
Conn_01x10_Female
J10
2
Polyfuse
F1, F2
1
SW_SPST
SW1
1
K1-1506SN-01
SW2
1
LED-IR
D1
1
LED-RED
D2
1
LED-GREEN
D3
12
WS2812B
D4, D5, D6, D7, D8, D9, D10, D11 +4
5
1N4148WL
D16, D17, D18, D19, D20
1
4.7µH
L1
1
1µH
L2
16
10µF
C1, C2, C3, C4, C5, C6, C7, C8 +8
5
4.7µF
C17, C18, C19, C20, C21
29
100NF
100nF
C22, C23, C24, C25, C26, C27, C28, C29 +21
1
560kΩ
R1
1
510kΩ
R2
1
620kΩ 1%
R3
2
453kΩ 1%
R4, R5
3
30kΩ 1%
R6, R7, R8
4
470Ω
R9, R10, R11, R12
6
56Ω
R13, R14, R15, R16, R17, R18
9
2.2kΩ
R19, R20, R21, R22, R23, R24, R25, R26 +1
15
100kΩ 1%
R28, R29, R30, R31, R32, R33, R34, R35 +7

Teebeutel-Hardware design files

The KiCad project lives in the entropia/Teebeutel-Hardware repository on GitHub; these links point at the commit this page was built from.

Teebeutel-Hardware: common questions

What microcontroller does the Teebeutel-Hardware use?

The Teebeutel-Hardware is built around the ESP32-WROOM-32E(16MB), from the ESP32 family.

How big is the Teebeutel-Hardware PCB?

The Teebeutel-Hardware measures 72 × 121 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Teebeutel-Hardware?

152 components, from 46 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Teebeutel-Hardware design files?

From the entropia/Teebeutel-Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Teebeutel-Hardware design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which entropia chose for the repository.

Can I test firmware for the Teebeutel-Hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards