24 open source boards using the TXB0104RUT

Real designs built with the TXB0104RUT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

24 boardsClear filters|Most starred

How designs wire the TXB0104RUT

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the TXB0104RUT connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCA pin has a decoupling capacitor on 9 of 13 designs, most often 100 nF (then 470 nF).
  • The VCCB pin has a decoupling capacitor on 9 of 12 designs, most often 100 nF (then 470 nF).
VCCApin 1Connected to: 3.3V 85% · a signal 15%
  • Decoupling capacitor on 69% · 100 nF (13), 470 nF (4), 47 µF (1)
GNDpin 6Connected to: GND 92%
VCCBpin 11Connected to: 3.3V 85% · a signal 15%
  • Decoupling capacitor on 75% · 100 nF (8), 470 nF (2)

9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gp4-hil by azonenberg, Blep hackerboard by CRImier, Marblewalrus switch by azonenberg and BesteLampe! ABL Controller Module by lenaschimmel.

The TXB0104RUT in open source designs

The gallery holds 24 open source boards using the TXB0104RUT from 13 GitHub repositories; a typical one measures about 130 × 62.5 mm and carries around 123 components.

79% use four copper layers or more, and 21% carry an open source license.

The most starred is Gp4-hil by azonenberg.

Parts used alongside the TXB0104RUT

Microcontrollers on boards using the TXB0104RUT

TXB0104RUT: common questions

Where can I find a TXB0104RUT reference design?

Each of the 24 boards on this page is a real design using the TXB0104RUT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TXB0104RUT VCCA pin?

The VCCA pin has a decoupling capacitor on 9 of 13 designs, most often 100 nF (then 470 nF). Counted from the KiCad layouts of 13 open source designs using the TXB0104RUT.

What decoupling capacitors do designs use on the TXB0104RUT VCCB pin?

The VCCB pin has a decoupling capacitor on 9 of 12 designs, most often 100 nF (then 470 nF). Counted from the KiCad layouts of 13 open source designs using the TXB0104RUT.

Which microcontrollers do boards using the TXB0104RUT use?

Most are built on ESP32 (4), FPGA (2), Nordic nRF (1) and RP2040/RP2350 (1).

How big is a typical board using the TXB0104RUT?

The median is 130 × 62.5 mm, and 21% are two-layer designs.

What is the most popular open source board using the TXB0104RUT?

By GitHub stars, Gp4-hil by azonenberg, with 260 stars.

Can I simulate one of these boards using the TXB0104RUT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part