9 open source boards using the LIS2DE12
Real designs built with the LIS2DE12, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
TI MSP430/CC
Beagleconnect freedom
beagleboard
35.8 × 58 mm176 parts4LCC-BY-4.01ESP32
Teebeutel-Hardware
entropia
72 × 121 mm152 parts2LCERN-OHL-S-2.01STM32
BGA 0201 RECT
rm-1n
6 × 24.7 mm14 parts4LMIT0- schematic only · 30 parts
LoRa-Based-Pet-Tracking-Collar
kingsmanayan
30 partsNo license0 ESP32
Panic button tiny
HenraL
38.2 × 38.3 mm16 parts2LMIT0STM32
Corevus toolboard panelize
calithameridi
80 × 80 mm84 parts4LNo license25STM32
Corevus toolboard panelize2
calithameridi
80 × 80 mm84 parts4LNo license25STM32
Corevus toolboard
calithameridi
49.8 × 25.5 mm81 parts4LNo license25STM32
Corevus toolboard panelize3
calithameridi
78 × 78 mm81 parts4LNo license25
The LIS2DE12 in open source designs
The gallery holds 9 open source boards using the LIS2DE12 from 6 GitHub repositories; a typical one measures about 60.9 × 68 mm and carries around 81 components.
75% use four copper layers or more, and 44% carry an open source license.
The most starred is Corevus toolboard panelize by calithameridi.
Parts used alongside the LIS2DE12
Microcontrollers on boards using the LIS2DE12
What boards using the LIS2DE12 are built for
LIS2DE12: common questions
Where can I find a LIS2DE12 reference design?
Each of the 9 boards on this page is a real design using the LIS2DE12. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LIS2DE12 use?
Most are built on STM32 (5), ESP32 (2) and TI MSP430/CC (1).
How big is a typical board using the LIS2DE12?
The median is 60.9 × 68 mm, and 25% are two-layer designs.
What is the most popular open source board using the LIS2DE12?
By GitHub stars, Corevus toolboard panelize by calithameridi, with 25 stars.
Can I simulate one of these boards using the LIS2DE12 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.