Usb c one
fgihl·usb-c-one·llm-kicad/llm-kicad.kicad_pcb
About the Usb c one PCB
Usb c one is an open source PCB design by fgihl, published on GitHub. It is a 4-layer board measuring 50 × 40 mm, with 83 components from 47 distinct parts.
Other key parts include the CH334F, CP2102N-A02-GQFN28, TPD4E05U06DQA, TPS259470LRPWR and TS3USB221A. By type, the board carries 32 resistors, 24 capacitors, 12 ICs, 4 transistors, 4 connectors and 3 LEDs.
It belongs with the power & battery designs in this gallery.
From the project
Small one port USB-C hub, similar to YKUSH XS, but uses USB-C connectors
A bench device that sits between a Raspberry Pi and a USB-C device under test (DUT). Host software gets controlled access to the DUT's USB 2.0 data, USB-C CC attachment and 5 V VBUS, so it can emulate unplugging and reconnecting the DUT without touching its cable.
It is intended for controlled hardware-in-the-loop (HIL) lab rigs. It is not a general-purpose USB-C charger, dock or power-distribution product.

Main components on the Usb c one
Usb c one bill of materials (BOM)
83 components, 47 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH334F | QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U1 |
| 1 | CP2102N-A02-GQFN28 | QFN-28-1EP_5x5mm_P0.5mm_EP3.25x3.25mm | U2 |
| 3 | TPD4E05U06DQA | USON-10_2.5x1.0mm_P0.5mm | U3, U9, U10 |
| 1 | TPS259470LRPWR | TPS259470LRPWR | U4 |
| 1 | TS3USB221A | Texas_UQFN-10_1.5x2mm_P0.5mm | U5 |
| 1 | SN74LVC1G125DBVR | SOT-23-5 | U6 |
| 1 | TLV76733DRVR | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | U8 |
| 1 | TPD4E05U06DQAR | USON-10_2.5x1.0mm_P0.5mm | U11 |
| 1 | TPS2121RUXR | Texas_VQFN-HR-12_2x2.5mm_P0.5mm | U14 |
| 1 | LTV-217 | SOP-4_4.4x2.6mm_P1.27mm | U15 |
| 4 | C75547 BSS138P,215 | SOT-23 | Q2, Q3, Q6, Q7 |
| 1 | C9002 Crystal 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 2 | TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1, J3 |
| 1 | TYPE-C-31-M-17 | USB_C_Receptacle_HRO_TYPE-C-31-M-17 | J2 |
| 1 | CONN_01X02_SOCKET Conn_01x02_Socket | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | C2297 Green | LED_0805_2012Metric | LED1 |
| 1 | C2296 Yellow | LED_0805_2012Metric | LED2 |
| 1 | C2286 Red | LED_0603_1608Metric | LED3 |
| 3 | SMAJ6.5A | D_SMA | D1, D2, D3 |
| 4 | C1779 4.7uF 25V | C_0805_2012Metric | C1, C3, C23, C25 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100PF 100pF | C_0402_1005Metric | C2 |
| 1 | C96123 47uF 10V | C_1206_3216Metric | C5 |
| 9 | 100NF 100nF | C_0402_1005Metric | C6, C10, C13, C20, C22, C24, C26, C27 +1 |
| 3 | C15850 10uF 25V | C_0805_2012Metric | C9, C11, C12 |
| 1 | 1NF 1nF | C_0402_1005Metric | C14 |
| 1 | C52923 1uF 0402 25V | C_0402_1005Metric | C16 |
| 1 | C15850 10uF 0805 25V | C_0805_2012Metric | C17 |
| 1 | C1525 100nF 0402 | C_0402_1005Metric | C18 |
| 2 | C52923 1uF 25V | C_0402_1005Metric | C19, C21 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R1, R2 |
| 2 | C25905 5.1k 0402 | R_0402_1005Metric | R3, R4 |
| 2 | 4.7K 4.7k | R_0402_1005Metric | R5, R6 |
| 5 | 1k | R_0402_1005Metric | R27, R47, R50, R51, R52 |
| 4 | 10K 10k | R_0402_1005Metric | R28, R33, R34, R35 |
| 1 | 49.9K 49.9k | R_0402_1005Metric | R29 |
| 1 | 12K 12k | R_0402_1005Metric | R30 |
| 1 | C852955 931R 0.1% | R_0402_1005Metric | R31 |
| 1 | 24K 24k | R_0402_1005Metric | R32 |
| 1 | C17710 470R 0805 | R_0805_2012Metric | R36 |
| 1 | C25741 100k 0402 | R_0402_1005Metric | R37 |
| 2 | C25744 10k 0402 | R_0402_1005Metric | R38, R79 |
| 1 | C25762 18k 0402 | R_0402_1005Metric | R39 |
| 1 | C11702 1k 0402 | R_0402_1005Metric | R40 |
| 1 | 22K 22k | R_0402_1005Metric | R43 |
| 1 | 47K 47k | R_0402_1005Metric | R44 |
| 4 | 100K 100k | R_0402_1005Metric | R45, R46, R48, R49 |
| 1 | C25104 330R 0402 | R_0402_1005Metric | R76 |
Usb c one design files
The KiCad project lives in the fgihl/usb-c-one repository on GitHub; these links point at the commit this page was built from.
Usb c one: common questions
How big is the Usb c one PCB?
The Usb c one measures 50 × 40 mm, has 4 copper layers and is 1.5842 mm thick.
How many components are on the Usb c one?
83 components, from 47 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Usb c one design files?
From the fgihl/usb-c-one repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Usb c one design in my own project?
The repository has no license, so all rights stay with fgihl. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k