10 open source boards using the TS3USB221A
Real designs built with the TS3USB221A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
USB
SPIRIT-org
70 × 60 mm23 parts4LNo license4ESP32
Skimmer-Detector-PRO
planmarks
84.2 × 49.8 mm65 parts2LNo license1RP2040/RP2350
Robot link
sequoia-hope
28 × 63 mm93 parts6LNo license0ESP32
Main
jason-watkins
70 × 65 mm91 parts2LCC-BY-SA-4.00Usb c one
fgihl
50 × 40 mm83 parts4LNo license0- schematic only · 84 parts
Daedalus v0
gregtidanian
84 partsNo license0 - schematic only · 42 parts
Hw ic key
dataxcash
42 partsAGPL-3.00 Raspberry Pi
USB-rev-2
SPIRIT-org
70.3 × 60 mm23 parts4LNo license4ESP32
Controller v2
lxdinh
57 × 56.5 mm35 parts2LNo license1
How designs wire the TS3USB221A
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TS3USB221A connects to, and the resistors, capacitors and other passives placed on it.
- The VCC_10 pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF.
- The OE_6 pin is tied to GND on 5 of 7 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND_5pin 5 | Connected to: GND 100% | — |
| OE_6pin 6 | Connected to: GND 71% · a signal 29% | — |
| VCC_10pin 10 | Connected to: 3.3V 71% · a signal 29% |
|
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SPIRIT by SPIRIT-org, USB by SPIRIT-org, Controller v2 by lxdinh and Skimmer-Detector-PRO by planmarks.
The TS3USB221A in open source designs
The gallery holds 10 open source boards using the TS3USB221A from 9 GitHub repositories; a typical one measures about 70 × 60 mm and carries around 74 components.
63% use four copper layers or more, and 30% carry an open source license.
The most starred is SPIRIT by SPIRIT-org.
Parts used alongside the TS3USB221A
Microcontrollers on boards using the TS3USB221A
What boards using the TS3USB221A are built for
TS3USB221A: common questions
Where can I find a TS3USB221A reference design?
Each of the 10 boards on this page is a real design using the TS3USB221A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TS3USB221A VCC_10 pin?
The VCC_10 pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the TS3USB221A.
How is the TS3USB221A OE_6 pin connected?
The OE_6 pin is tied to GND on 5 of 7 designs (a signal on 2). Counted from the KiCad layouts of 7 open source designs using the TS3USB221A.
Which microcontrollers do boards using the TS3USB221A use?
Most are built on ESP32 (3), Raspberry Pi (3) and RP2040/RP2350 (1).
How big is a typical board using the TS3USB221A?
The median is 70 × 60 mm, and 38% are two-layer designs.
What is the most popular open source board using the TS3USB221A?
By GitHub stars, SPIRIT by SPIRIT-org, with 1,310 stars.
Can I simulate one of these boards using the TS3USB221A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.