15 open source boards using the TPS259470LRPWR

Real designs built with the TPS259470LRPWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the TPS259470LRPWR

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the TPS259470LRPWR connects to, and the resistors, capacitors and other passives placed on it.

  • The EN_UVLO_1 pin has a resistor to GND on 9 of 11 designs, most often 10 kΩ (then 100 kΩ).
  • The OVLO_2 pin has a resistor to GND on 9 of 11 designs, most often 10 kΩ (then 100 kΩ).
  • The OVLO_2 pin has a series resistor on 8 of 11 designs, most often 100 kΩ (then 383 kΩ).
  • The IN_5 pin has a capacitor to GND on 8 of 11 designs, most often 100 nF (then 1 µF).
EN_UVLO_1pin 1Connected to: Signal 100%
  • Resistor to GND on 82% · 10 kΩ (5), 100 kΩ (3), 8.45 kΩ (1)
  • Series resistor on 64% · 10 kΩ (2), 267 kΩ (1), 17.5 kΩ (1)
OVLO_2pin 2Connected to: Signal 100%
  • Resistor to GND on 82% · 10 kΩ (5), 100 kΩ (2), 12 kΩ (1)
  • Series resistor on 73% · 100 kΩ (1), 383 kΩ (1), 115 kΩ (1)
AUXOFF_3pin 3Connected to: Not connected 73% · a signal 27%
FLT_N_4pin 4Connected to: Signal 64% · not connected 36%
  • Pull-up to 3.3V on 36% · 10 kΩ (3), 100 kΩ (1)
IN_5pin 5Connected to: A connector 27% · 5V 36%
  • Capacitor to GND on 73% · 100 nF (9), 1 µF (4), 4.7 µF (1)
  • Series resistor on 64% · 39 kΩ (2), 34 kΩ (2), 383 kΩ (1)
OUT_6pin 6Connected to: Signal 64% · 5V 36%
  • Capacitor to GND on 64% · 10 µF (9), 100 nF (5), 22 µF (3)
  • Series resistor on 64% · 100 kΩ (3), 1 kΩ (2), 103 kΩ (1)
DVDT_7pin 7Connected to: Signal 100%
  • Capacitor to GND on 73% · 10 nF (4), 1 nF (2), 1.5 nF (1)
GND_8pin 8Connected to: GND 82% · a signal 18%
ILM_9pin 9Connected to: Signal 100%
  • Resistor to GND on 64% · 3.32 kΩ (1), 2.55 kΩ (1), 787 Ω (1)
  • Series resistor on 36% · 3.3 kΩ (2), 10 kΩ (2), 4.7 kΩ (1)
ITIMER_10pin 10Connected to: Not connected 82% · a signal 18%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MagMouse by sbarisic, Tile by Bruhdows, SN-64 by FantomZap and Zynqinator by rkarl2.

The TPS259470LRPWR in open source designs

The gallery holds 15 open source boards using the TPS259470LRPWR from 11 GitHub repositories; a typical one measures about 99.5 × 95 mm and carries around 199 components.

93% use four copper layers or more, and 40% carry an open source license.

The most starred is MagMouse by sbarisic.

Microcontrollers on boards using the TPS259470LRPWR

TPS259470LRPWR: common questions

Where can I find a TPS259470LRPWR reference design?

Each of the 15 boards on this page is a real design using the TPS259470LRPWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TPS259470LRPWR EN_UVLO_1 pin?

The EN_UVLO_1 pin has a resistor to GND on 9 of 11 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 11 open source designs using the TPS259470LRPWR.

What resistor goes on the TPS259470LRPWR OVLO_2 pin?

The OVLO_2 pin has a resistor to GND on 9 of 11 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 11 open source designs using the TPS259470LRPWR.

How is the TPS259470LRPWR IN_5 pin connected?

The IN_5 pin has a capacitor to GND on 8 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the TPS259470LRPWR.

What parts are used alongside the TPS259470LRPWR?

The AP2112K-3.3TRG1, TMUX1511PWR, TPS22918DBVR, TPS3808G01DBVR and ICM-42688-P appear in the most repositories here.

Which microcontrollers do boards using the TPS259470LRPWR use?

Most are built on ESP32 (6), FPGA (2), WCH CH32/CH55x (1) and Raspberry Pi (1).

How big is a typical board using the TPS259470LRPWR?

The median is 99.5 × 95 mm, and 7% are two-layer designs.

What is the most popular open source board using the TPS259470LRPWR?

By GitHub stars, MagMouse by sbarisic, with 2 stars.

Can I simulate one of these boards using the TPS259470LRPWR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part