8 open source boards using the TLV3501AIDBVR
Real designs built with the TLV3501AIDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Controller
westonb
80 × 100 mm198 parts4LNo license13FPGA
Integrated
westonb
200 × 100 mm268 parts4LNo license4STM32
Mdx1
pingpongshow
135 × 92 mm306 parts4LCC-BY-NC-4.00FPGA
Dogrudan sdr A
kocer
235 × 225 mm279 parts6LNo license1Amod c
gallicchio
100 × 100 mm211 parts4LCERN-OHL-P-2.00Amod m
gallicchio
100 × 100 mm207 parts4LCERN-OHL-P-2.00Amod a
gallicchio
100 × 100 mm188 parts4LCERN-OHL-P-2.00Amod b
gallicchio
100 × 100 mm143 parts4LCERN-OHL-P-2.00
How designs wire the TLV3501AIDBVR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TLV3501AIDBVR connects to, and the resistors, capacitors and other passives placed on it.
- The -_1 pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ (then 4.7 kΩ).
- The V+_4 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 470 nF).
- The V-_2 pin is tied to GND on 5 of 5 designs.
- The SHDN_6 pin is tied to GND on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| -_1pin 1 | Connected to: Signal 100% |
|
| V-_2pin 2 | Connected to: GND 100% | — |
| +_3pin 3 | Connected to: Signal 100% |
|
| V+_4pin 4 | Connected to: 3.3V 80% · a signal 20% |
|
| Pin 5 | Connected to: The microcontroller 60% |
|
| SHDN_6pin 6 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Controller by westonb, Integrated by westonb, Dogrudan sdr A by kocer and Amod a by gallicchio.
The TLV3501AIDBVR in open source designs
The gallery holds 8 open source boards using the TLV3501AIDBVR from 5 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 209 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Controller by westonb.
Parts used alongside the TLV3501AIDBVR
What boards using the TLV3501AIDBVR are built for
TLV3501AIDBVR: common questions
Where can I find a TLV3501AIDBVR reference design?
Each of the 8 boards on this page is a real design using the TLV3501AIDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TLV3501AIDBVR -_1 pin?
The -_1 pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 5 open source designs using the TLV3501AIDBVR.
What decoupling capacitors do designs use on the TLV3501AIDBVR V+_4 pin?
The V+_4 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 470 nF). Counted from the KiCad layouts of 5 open source designs using the TLV3501AIDBVR.
How is the TLV3501AIDBVR V-_2 pin connected?
The V-_2 pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TLV3501AIDBVR.
What parts are used alongside the TLV3501AIDBVR?
The 74AVC4TD245BQ, AD9609, AFBR-1624Z, AFBR-2624Z and MCP6561-OT appear in the most repositories here.
Which microcontrollers do boards using the TLV3501AIDBVR use?
Most are built on FPGA (3) and STM32 (1).
How big is a typical board using the TLV3501AIDBVR?
The median is 100 × 100 mm, and 0% are two-layer designs.
What is the most popular open source board using the TLV3501AIDBVR?
By GitHub stars, Controller by westonb, with 13 stars.
Can I simulate one of these boards using the TLV3501AIDBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.