10 open source boards using the LM2664M6X/NOPB
Real designs built with the LM2664M6X/NOPB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Psu ext hardware
PSU-Ext-Org
100 × 50 mm110 parts4LCERN-OHL-S-2.07Phmod
gallicchio
100 × 100 mm234 parts4LCERN-OHL-P-2.00STM32
SG-3
ttosu25
132.7 × 89.6 mm93 parts4LNo license0Nordic nRF
Eeg
bradkim06
35 × 23 mm71 parts6LApache-2.00STM32
HANDS-EMG-BOARD
blakep7
80 × 54 mm113 parts4LNo license1Amod c
gallicchio
100 × 100 mm211 parts4LCERN-OHL-P-2.00Amod m
gallicchio
100 × 100 mm207 parts4LCERN-OHL-P-2.00Amod a
gallicchio
100 × 100 mm188 parts4LCERN-OHL-P-2.00Iq mod
gallicchio
100 × 100 mm186 parts4LCERN-OHL-P-2.00Amod b
gallicchio
100 × 100 mm143 parts4LCERN-OHL-P-2.00
How designs wire the LM2664M6X/NOPB
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LM2664M6X/NOPB connects to, and the resistors, capacitors and other passives placed on it.
- The CAP- pin has a series capacitor on 5 of 5 designs, most often 10 µF.
- The CAP+ pin has a series capacitor on 5 of 5 designs, most often 10 µF.
- The OUT pin is tied to -5V on 4 of 5 designs.
- The SD_N pin is tied to 5V on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| OUTpin 2 | Connected to: -5V 80% · GND 20% | — |
| CAP-pin 3 | Connected to: Signal 100% |
|
| SD_Npin 4 | Connected to: 5V 80% · a signal 20% | — |
| V+pin 5 | Connected to: 5V 80% · a signal 20% |
|
| CAP+pin 6 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Psu ext hardware by PSU-Ext-Org, HANDS-EMG-BOARD by blakep7, Eeg by bradkim06 and Amod a by gallicchio.
The LM2664M6X/NOPB in open source designs
The gallery holds 10 open source boards using the LM2664M6X/NOPB from 5 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 165 components.
100% use four copper layers or more, and 80% carry an open source license.
The most starred is Psu ext hardware by PSU-Ext-Org.
Parts used alongside the LM2664M6X/NOPB
Microcontrollers on boards using the LM2664M6X/NOPB
What boards using the LM2664M6X/NOPB are built for
LM2664M6X/NOPB: common questions
Where can I find a LM2664M6X/NOPB reference design?
Each of the 10 boards on this page is a real design using the LM2664M6X/NOPB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM2664M6X/NOPB CAP- pin connected?
The CAP- pin has a series capacitor on 5 of 5 designs, most often 10 µF. Counted from the KiCad layouts of 5 open source designs using the LM2664M6X/NOPB.
How is the LM2664M6X/NOPB CAP+ pin connected?
The CAP+ pin has a series capacitor on 5 of 5 designs, most often 10 µF. Counted from the KiCad layouts of 5 open source designs using the LM2664M6X/NOPB.
How is the LM2664M6X/NOPB OUT pin connected?
The OUT pin is tied to -5V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the LM2664M6X/NOPB.
Which microcontrollers do boards using the LM2664M6X/NOPB use?
Most are built on STM32 (2), ESP32 (1) and Nordic nRF (1).
How big is a typical board using the LM2664M6X/NOPB?
The median is 100 × 100 mm, and 0% are two-layer designs.
What is the most popular open source board using the LM2664M6X/NOPB?
By GitHub stars, Psu ext hardware by PSU-Ext-Org, with 7 stars.
Can I simulate one of these boards using the LM2664M6X/NOPB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.