602

GizmoMiner·602

602 PCB layout, top view — open source ESP32 board by GizmoMiner

About the 602 PCB

602 is an open source ESP32 PCB design by GizmoMiner, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 56.5 × 99.8 mm, with 90 components from 42 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the TPS546D24ARVFR, RT9080-33GJ5, MCP1824T-1202E/OT, MCP1824T-0802E and 25MHZ. By type, the board carries 53 capacitors, 20 resistors, 9 ICs, 5 connectors, 2 switches and 1 inductor.

It belongs with the iot & wireless designs in this gallery.

From the project

- Bitmain claims the BM1370 has 15 J/TH efficiency. We can get pretty close to that with the BitaxeGamma - The Antminer S21 Pro has a nominal hashrate of 234 TH/s. There are 3 hashboards with 65 chips each, for a total of 195 chips. The bitaxeGamma has a single one of these chips

- Bitmain claims the BM1370 has 15 J/TH efficiency. We can get pretty close to that with the BitaxeGamma - The Antminer S21 Pro has a nominal hashrate of 234 TH/s. There are 3 hashboards with 65 chips each, for a total of 195 chips. The bitaxeGamma has a single one of these chips. That means about 1.2 TH/s per bitaxeGamma. Initial testing looks good! - The BM1370 is brand new and isn't available individually yet. The best place to get these chips is right out of a S21 Pro. - The BM1370 has a different footprint and pinout from the BM1368, BM1366, BM1397 and BM1387 in previous bitaxe.

602, from the project README
From the project README

Main components on the 602

602 bill of materials (BOM)

90 components, 42 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS546D24ARVFR
U2
1
RT9080-33GJ5
U3
1
ESP32-S3-WROOM-1
U4
1
MCP1824T-1202E/OT
U5
1
MCP1824T-0802E
U6
1
25MHZ
25MHz
U7
1
BM1370_MODE1
BM1370_mode1
U8
1
SN74AVC4T774
U9
1
EMC2101
U10
1
54-00164
J1
1
Conn_01x04
J3
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J5
1
CONN_01X04
Conn_01x04
J6
1
CONN_01X04
Conn_01x04
J7
2
GT-TC029B-H025-L1N
SW1, SW2
1
300NH
300nH
L1
24
1UF
1uF
C1, C5, C7, C21, C22, C23, C26, C27 +16
2
10UF
10uF
C2, C24
3
47UF
47uF
C3, C4, C51
1
4700PF
4700pF
C6
Show 22 more
QtyPartRefs
10
0.1UF
0.1uF
C8, C12, C25, C29, C37, C38, C47, C49 +2
1
2200PF
2200pF
C9
1
4.7UF
4.7uF
C10
1
1000PF
1000pF
C11
1
100PF
100pF
C13
3
22UF
22uF
C14, C15, C16
5
100UF
100uF
C17, C18, C19, C20, C43
1
470PF
470pF
C50
1
8.25K
8.25k
R1
1
14.7K
14.7k
R5
1
0
R6
1
3.74K
3.74k
R8
1
11.8K
11.8k
R9
1
68.1K
68.1k
R10
1
10
R11
1
1
R12
2
49.9
R13, R14
4
10K
10k
R15, R16, R17, R25
2
1k
R18, R19
1
20K
20k
R21
2
100
R22, R23
1
5.6K
5.6k
R24

602 design files

The KiCad project lives in the GizmoMiner/602 repository on GitHub; these links point at the commit this page was built from.

602: common questions

What microcontroller does the 602 use?

The 602 is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the 602 PCB?

The 602 measures 56.5 × 99.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the 602?

90 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 602 design files?

From the GizmoMiner/602 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 602 design in my own project?

Yes, under the terms of its GPL-3.0 license, which GizmoMiner chose for the repository.

Can I test firmware for the 602 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards