17 open source boards using the BM1370_MODE1

Real designs built with the BM1370_MODE1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

17 boardsClear filters|Most starred

How designs wire the BM1370_MODE1

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the BM1370_MODE1 connects to, and the resistors, capacitors and other passives placed on it.

  • The LITE_PAD pin has a resistor to GND on 15 of 15 designs, most often 1 kΩ.
  • The VDDIO_12_1 pin has a capacitor to GND on 15 of 15 designs, most often 1 µF.
  • The VDDIO_08_1 pin has a capacitor to GND on 15 of 15 designs, most often 1 µF.
  • The VDDIO_08_0 pin has a decoupling capacitor on 14 of 15 designs, most often 1 µF.
VDD3_0pin 1Connected to: VDD1_0 60% · a signal 40%
  • Capacitor on 60% · 1 µF (18)
VDD2_0pin 2Connected to: VDD2_0 60% · a signal 40%
  • Capacitor on 60% · 1 µF (16)
VDD1_0pin 3Connected to: VDD3_0 60% · a signal 40%
  • Decoupling capacitor on 87% · 1 µF (13)
  • Capacitor on 47% · 1 µF (7)
VSSpin 4, 18, 27, 32Connected to: GND 100%
BIpin 9Connected to: Signal 100%
  • Resistor to GND on 87% · 10 kΩ (12), 1 kΩ (1)
ROSC_SELpin 10Connected to: Signal 60% · not connected 40%
  • Resistor to GND on 47% · 1 kΩ (7)
LITE_PADpin 11Connected to: Signal 100%
  • Resistor to GND on 100% · 1 kΩ (15)
PLL_VSSpin 13Connected to: GND 100%
VDDIO_08_0pin 14Connected to: 0.8V 93%
  • Decoupling capacitor on 93% · 1 µF (15)
VDDIO_12_0pin 15Connected to: 1.2V 93%
  • Decoupling capacitor on 93% · 1 µF (15)
VDDIO_12_1pin 16Connected to: Signal 67% · 1.2V 33%
  • Capacitor to GND on 100% · 1 µF (15)
VDDIO_08_1pin 17Connected to: Signal 67% · 0.8V 33%
  • Capacitor to GND on 100% · 1 µF (15)
TEMP_Ppin 20Connected to: Signal 73% · not connected 27%
  • Series resistor on 60% · 100 Ω (8), 0 Ω (1)
TEMP_Npin 21Connected to: Signal 73% · not connected 27%
  • Series resistor on 60% · 100 Ω (8), 0 Ω (1)
VDD1_1pin 28Connected to: VDD3_1 60% · a signal 40%
  • Decoupling capacitor on 87% · 1 µF (13)
  • Capacitor on 47% · 1 µF (7)
VDD2_1pin 29Connected to: VDD2_1 60% · a signal 40%
  • Capacitor on 60% · 1 µF (16)
VDD3_1pin 30Connected to: VDD1_1 60% · a signal 40%
  • Capacitor on 60% · 1 µF (19)
VDDpin 31Connected to: VDD 93%
  • Decoupling capacitor on 53% · 1 µF (10), 100 nF (10), 100 µF (7)
  • Capacitor on 53% · 1 µF (13)

11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BitaxeGamma by bitaxeorg, NerdOCTAXE-Gamma by Patsch91, NerdQX by IxTechCrypto and BitForge-Nano by WantClueTechnologies.

The BM1370_MODE1 in open source designs

The gallery holds 17 open source boards using the BM1370_MODE1 from 15 GitHub repositories; a typical one measures about 75 × 99.8 mm and carries around 116 components.

100% use four copper layers or more, and 76% carry an open source license.

The most starred is BitaxeGamma by bitaxeorg.

Microcontrollers on boards using the BM1370_MODE1

What boards using the BM1370_MODE1 are built for

BM1370_MODE1: common questions

Where can I find a BM1370_MODE1 reference design?

Each of the 17 boards on this page is a real design using the BM1370_MODE1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the BM1370_MODE1 LITE_PAD pin?

The LITE_PAD pin has a resistor to GND on 15 of 15 designs, most often 1 kΩ. Counted from the KiCad layouts of 15 open source designs using the BM1370_MODE1.

How is the BM1370_MODE1 VDDIO_12_1 pin connected?

The VDDIO_12_1 pin has a capacitor to GND on 15 of 15 designs, most often 1 µF. Counted from the KiCad layouts of 15 open source designs using the BM1370_MODE1.

How is the BM1370_MODE1 VDDIO_08_1 pin connected?

The VDDIO_08_1 pin has a capacitor to GND on 15 of 15 designs, most often 1 µF. Counted from the KiCad layouts of 15 open source designs using the BM1370_MODE1.

What parts are used alongside the BM1370_MODE1?

The 25MHZ, MCP1824T-0802E, EMC2101, ESP32-S3-WROOM-1 and TPS546D24ARVFR appear in the most repositories here.

Which microcontrollers do boards using the BM1370_MODE1 use?

Most are built on ESP32 (12).

How big is a typical board using the BM1370_MODE1?

The median is 75 × 99.8 mm, and 0% are two-layer designs.

What is the most popular open source board using the BM1370_MODE1?

By GitHub stars, BitaxeGamma by bitaxeorg, with 430 stars.

Can I simulate one of these boards using the BM1370_MODE1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part