18 open source boards using the TPS546D24ARVFR
Real designs built with the TPS546D24ARVFR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
BitaxeGamma
bitaxeorg
56.5 × 99.8 mm90 parts4LCERN-OHL-S-2.0430ESP32
BitaxeSupra
bitaxeorg
56.5 × 99.8 mm89 parts4LCERN-OHL-S-2.034ESP32
BitForge-Nano
WantClueTechnologies
55 × 120 mm183 parts6LCERN-OHL-S-2.015ESP32
Bittyaxe
BeeEvolved
55.5 × 66.9 mm85 parts4LCERN-OHL-S-2.07ESP32
BitaxeBonanza
bitaxeorg
130 × 112 mm202 parts6LCERN-OHL-S-2.05ESP32
BitshokaNini V1.1
kuenrg153
56.5 × 99.8 mm115 parts4LGPL-3.02ESP32
BitshokaNini V1.2
kuenrg153
56.5 × 99.8 mm110 parts4LGPL-3.01ESP32
Hashdisk
BeeEvolved
99.6 × 95.4 mm86 parts4LCERN-OHL-S-2.01ESP32
OpenSourcedMiners
Luckst4r
171.1 × 83.1 mm378 parts6LCERN-OHL-S-2.00ESP32
Bitair mainboard
heatbitinc
72.5 × 80.5 mm138 parts4LCERN-OHL-S-2.00ESP32
BitcoinMiner
sneakylizard123-4
75 × 100 mm116 parts4LNo license0ESP32
Cgminer codex
zf-aoyama
56.5 × 99.8 mm90 parts4LGPL-3.00ESP32
Cgminer custom
zf-aoyama
56.5 × 99.8 mm90 parts4LGPL-3.00ESP32
Cgminer asic
zf-aoyama
56.5 × 99.8 mm90 parts4LGPL-3.00ESP32
602
GizmoMiner
56.5 × 99.8 mm90 parts4LGPL-3.00ESP32
.bitcoinMiner.spinrender src
sneakylizard123-4
75 × 100 mm116 parts4LNo license0ESP32
.bitcoinMiner.spinrender tmp
sneakylizard123-4
75 × 100 mm116 parts4LNo license0ESP32
BitaxeGamma
imcmurray
56.5 × 99.8 mm90 parts4LNo license0
How designs wire the TPS546D24ARVFR
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the TPS546D24ARVFR connects to, and the resistors, capacitors and other passives placed on it.
- The PGD pin has a pull-up to 3.3V on 16 of 16 designs, most often 10 kΩ.
- The BP1V5 pin has a series capacitor on 16 of 16 designs, most often 1 µF.
- The BP1V5 pin has a series resistor on 16 of 16 designs, most often 8.25 kΩ (then 4.64 kΩ).
- The DRTN pin has a series capacitor on 16 of 16 designs, most often 1 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PGDpin 1 | Connected to: The microcontroller 100% |
|
| BP1V5pin 4 | Connected to: Signal 100% |
|
| DRTNpin 5 | Connected to: Signal 100% |
|
| BOOTpin 7 | Connected to: Signal 100% |
|
| SWpin 8, 9, 10, 11, 12 | Connected to: Signal 100% |
|
| PGNDpin 13, 14, 15, 16, 17, 18, 19, 20 | Connected to: GND 100% | — |
| PVINpin 21, 22, 23, 24, 25 | Connected to: 5V 100% |
|
| AVINpin 26 | Connected to: Signal 100% |
|
| EN/UVLOpin 27 | Connected to: Signal 100% |
|
| VDD5pin 28 | Connected to: Signal 100% |
|
| MSEL2pin 29 | Connected to: Signal 94% |
|
| VSELpin 30 | Connected to: Signal 100% |
|
| ADRSELpin 31 | Connected to: Signal 81% · not connected 19% |
|
| MSEL1pin 32 | Connected to: Signal 100% |
|
| VOSNSpin 33 | Connected to: Signal 100% |
|
| GOSNSpin 34 | Connected to: Signal 100% |
|
| VSHAREpin 35 | Connected to: Not connected 94% | — |
| NCpin 36 | Connected to: Not connected 94% | — |
| AGNDpin 37 | Connected to: GND 100% | — |
| SYNCpin 38 | Connected to: Not connected 94% | — |
| BCX_CLKpin 39 | Connected to: Not connected 94% | — |
| BCX_DATpin 40 | Connected to: Not connected 94% | — |
| PADpin 41 | Connected to: GND 100% | — |
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BitaxeGamma by bitaxeorg, BitaxeSupra by bitaxeorg, BitForge-Nano by WantClueTechnologies and Bittyaxe by BeeEvolved.
The TPS546D24ARVFR in open source designs
The gallery holds 18 open source boards using the TPS546D24ARVFR from 16 GitHub repositories; a typical one measures about 56.5 × 99.8 mm and carries around 100 components.
100% use four copper layers or more, and 78% carry an open source license.
The most starred is BitaxeGamma by bitaxeorg.
Parts used alongside the TPS546D24ARVFR
Microcontrollers on boards using the TPS546D24ARVFR
What boards using the TPS546D24ARVFR are built for
TPS546D24ARVFR: common questions
Where can I find a TPS546D24ARVFR reference design?
Each of the 18 boards on this page is a real design using the TPS546D24ARVFR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the TPS546D24ARVFR PGD pin?
The PGD pin has a pull-up to 3.3V on 16 of 16 designs, most often 10 kΩ. Counted from the KiCad layouts of 16 open source designs using the TPS546D24ARVFR.
How is the TPS546D24ARVFR BP1V5 pin connected?
The BP1V5 pin has a series capacitor on 16 of 16 designs, most often 1 µF. Counted from the KiCad layouts of 16 open source designs using the TPS546D24ARVFR.
How is the TPS546D24ARVFR DRTN pin connected?
The DRTN pin has a series capacitor on 16 of 16 designs, most often 1 µF. Counted from the KiCad layouts of 16 open source designs using the TPS546D24ARVFR.
What parts are used alongside the TPS546D24ARVFR?
The ESP32-S3-WROOM-1, RT9080-33GJ5, EMC2101, SN74AVC4T774 and 25MHZ appear in the most repositories here.
Which microcontrollers do boards using the TPS546D24ARVFR use?
Most are built on ESP32 (18).
How big is a typical board using the TPS546D24ARVFR?
The median is 56.5 × 99.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the TPS546D24ARVFR?
By GitHub stars, BitaxeGamma by bitaxeorg, with 430 stars.
Can I simulate one of these boards using the TPS546D24ARVFR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.