30 open source boards using the MCP1824T-0802E

Real designs built with the MCP1824T-0802E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

30 boardsClear filters|Most starred

How designs wire the MCP1824T-0802E

Read from the KiCad layouts of 25 open source designs, one per repository: what each pin of the MCP1824T-0802E connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN pin has a decoupling capacitor on 25 of 25 designs, most often 1 µF (then 100 nF).
  • The VOUT pin has a decoupling capacitor on 25 of 25 designs, most often 1 µF.
  • The PG pin is left unconnected on 25 of 25 designs.
  • The EN pin is tied to 5V on 19 of 25 designs (a signal on 6).
VINpin 1Connected to: 5V 100%
  • Decoupling capacitor on 100% · 1 µF (22), 100 nF (12), 220 nF (2)
GNDpin 2Connected to: GND 100%
ENpin 3Connected to: 5V 76% · a signal 24%
PGpin 4Connected to: Not connected 100%
VOUTpin 5Connected to: 0.8V 96%
  • Decoupling capacitor on 100% · 1 µF (26)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bitaxe by skot, BitaxeGamma by bitaxeorg, Qaxe by shufps and NerdOCTAXE-Gamma by Patsch91.

The MCP1824T-0802E in open source designs

The gallery holds 30 open source boards using the MCP1824T-0802E from 25 GitHub repositories; a typical one measures about 56.5 × 99.8 mm and carries around 94 components.

97% use four copper layers or more, and 73% carry an open source license.

The most starred is Bitaxe by skot.

Microcontrollers on boards using the MCP1824T-0802E

MCP1824T-0802E: common questions

Where can I find a MCP1824T-0802E reference design?

Each of the 30 boards on this page is a real design using the MCP1824T-0802E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the MCP1824T-0802E VIN pin?

The VIN pin has a decoupling capacitor on 25 of 25 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 25 open source designs using the MCP1824T-0802E.

What decoupling capacitors do designs use on the MCP1824T-0802E VOUT pin?

The VOUT pin has a decoupling capacitor on 25 of 25 designs, most often 1 µF. Counted from the KiCad layouts of 25 open source designs using the MCP1824T-0802E.

How is the MCP1824T-0802E PG pin connected?

The PG pin is left unconnected on 25 of 25 designs. Counted from the KiCad layouts of 25 open source designs using the MCP1824T-0802E.

What parts are used alongside the MCP1824T-0802E?

The 25MHZ, EMC2101, ESP32-S3-WROOM-1, RT9080-33GJ5 and BM1370_MODE1 appear in the most repositories here.

Which microcontrollers do boards using the MCP1824T-0802E use?

Most are built on ESP32 (20), STM32 (2) and RP2040/RP2350 (1).

How big is a typical board using the MCP1824T-0802E?

The median is 56.5 × 99.8 mm, and 3% are two-layer designs.

What is the most popular open source board using the MCP1824T-0802E?

By GitHub stars, Bitaxe by skot, with 1,375 stars.

Can I simulate one of these boards using the MCP1824T-0802E before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part