14 open source boards using the SN74AVC4T774

Real designs built with the SN74AVC4T774, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the SN74AVC4T774

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the SN74AVC4T774 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCB pin has a decoupling capacitor on 14 of 14 designs, most often 100 nF (then 1 µF).
  • The DIR2 pin is tied to GND on 12 of 14 designs (a signal on 2).
  • The OE pin has a resistor to GND on 10 of 14 designs, most often 20 kΩ (then 10 kΩ).
  • The DIR1 pin is tied to GND on 11 of 14 designs (a signal on 2).
DIR1pin 1Connected to: GND 79%
DIR2pin 2Connected to: GND 86%
A4pin 6Connected to: GND 79% · a signal 21%
DIR3pin 7Connected to: 1.2V 71% · a signal 21%
OEpin 9Connected to: Signal 71% · GND 29%
  • Resistor to GND on 71% · 20 kΩ (7), 10 kΩ (3)
GNDpin 10Connected to: GND 100%
B4pin 11Connected to: Not connected 79% · a signal 21%
VCCBpin 15Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (13), 1 µF (1)
VCCApin 16Connected to: 1.2V 93%
  • Decoupling capacitor on 36% · 100 nF (5), 1 µF (3)

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BitaxeGamma by bitaxeorg, Emberone00-pcb by 256foundation, BitaxeSupra by bitaxeorg and BitForge-Nano by WantClueTechnologies.

The SN74AVC4T774 in open source designs

The gallery holds 14 open source boards using the SN74AVC4T774 from 14 GitHub repositories; a typical one measures about 56.5 × 99.8 mm and carries around 90 components.

100% use four copper layers or more, and 93% carry an open source license.

The most starred is BitaxeGamma by bitaxeorg.

Microcontrollers on boards using the SN74AVC4T774

What boards using the SN74AVC4T774 are built for

SN74AVC4T774: common questions

Where can I find a SN74AVC4T774 reference design?

Each of the 14 boards on this page is a real design using the SN74AVC4T774. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SN74AVC4T774 VCCB pin?

The VCCB pin has a decoupling capacitor on 14 of 14 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 14 open source designs using the SN74AVC4T774.

How is the SN74AVC4T774 DIR2 pin connected?

The DIR2 pin is tied to GND on 12 of 14 designs (a signal on 2). Counted from the KiCad layouts of 14 open source designs using the SN74AVC4T774.

What resistor goes on the SN74AVC4T774 OE pin?

The OE pin has a resistor to GND on 10 of 14 designs, most often 20 kΩ (then 10 kΩ). Counted from the KiCad layouts of 14 open source designs using the SN74AVC4T774.

What parts are used alongside the SN74AVC4T774?

The ESP32-S3-WROOM-1, TPS546D24ARVFR, 25MHZ, EMC2101 and MCP1824T-1202E/OT appear in the most repositories here.

Which microcontrollers do boards using the SN74AVC4T774 use?

Most are built on ESP32 (13) and RP2040/RP2350 (1).

How big is a typical board using the SN74AVC4T774?

The median is 56.5 × 99.8 mm, and 0% are two-layer designs.

What is the most popular open source board using the SN74AVC4T774?

By GitHub stars, BitaxeGamma by bitaxeorg, with 430 stars.

Can I simulate one of these boards using the SN74AVC4T774 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part