14 open source boards using the MCP1824T-1202E/OT
Real designs built with the MCP1824T-1202E/OT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
BitaxeGamma
bitaxeorg
56.5 × 99.8 mm90 parts4LCERN-OHL-S-2.0430RP2040/RP2350
Emberone00
256foundation
128 × 128 mm316 parts6LCERN-OHL-S-2.045ESP32
BitaxeSupra
bitaxeorg
56.5 × 99.8 mm89 parts4LCERN-OHL-S-2.034ESP32
BitForge-Nano
WantClueTechnologies
55 × 120 mm183 parts6LCERN-OHL-S-2.015ESP32
Bittyaxe
BeeEvolved
55.5 × 66.9 mm85 parts4LCERN-OHL-S-2.07RP2040/RP2350
BitaxeBIRDS
bitaxeorg
65 × 120 mm129 parts6LCERN-OHL-S-2.06ESP32
BitaxeBonanza
bitaxeorg
130 × 112 mm202 parts6LCERN-OHL-S-2.05ESP32
Hashdisk
BeeEvolved
99.6 × 95.4 mm86 parts4LCERN-OHL-S-2.01ESP32
Bitair mainboard
heatbitinc
72.5 × 80.5 mm138 parts4LCERN-OHL-S-2.00ESP32
Cgminer custom
zf-aoyama
56.5 × 99.8 mm90 parts4LGPL-3.00ESP32
602
GizmoMiner
56.5 × 99.8 mm90 parts4LGPL-3.00ESP32
Cgminer codex
zf-aoyama
56.5 × 99.8 mm90 parts4LGPL-3.00ESP32
Cgminer asic
zf-aoyama
56.5 × 99.8 mm90 parts4LGPL-3.00ESP32
BitaxeGamma
imcmurray
56.5 × 99.8 mm90 parts4LNo license0
How designs wire the MCP1824T-1202E/OT
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the MCP1824T-1202E/OT connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 14 of 14 designs, most often 1 µF.
- The VOUT pin has a decoupling capacitor on 14 of 14 designs, most often 1 µF (then 100 nF).
- The EN pin is tied to 5V on 14 of 14 designs.
- The PG pin is left unconnected on 14 of 14 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5V 100% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| ENpin 3 | Connected to: 5V 100% | — |
| PGpin 4 | Connected to: Not connected 100% | — |
| VOUTpin 5 | Connected to: 1.2V 79% · a signal 21% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BitaxeGamma by bitaxeorg, Emberone00-pcb by 256foundation, BitaxeSupra by bitaxeorg and BitForge-Nano by WantClueTechnologies.
The MCP1824T-1202E/OT in open source designs
The gallery holds 14 open source boards using the MCP1824T-1202E/OT from 14 GitHub repositories; a typical one measures about 56.5 × 99.8 mm and carries around 90 components.
100% use four copper layers or more, and 93% carry an open source license.
The most starred is BitaxeGamma by bitaxeorg.
Parts used alongside the MCP1824T-1202E/OT
Microcontrollers on boards using the MCP1824T-1202E/OT
What boards using the MCP1824T-1202E/OT are built for
MCP1824T-1202E/OT: common questions
Where can I find a MCP1824T-1202E/OT reference design?
Each of the 14 boards on this page is a real design using the MCP1824T-1202E/OT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP1824T-1202E/OT VIN pin?
The VIN pin has a decoupling capacitor on 14 of 14 designs, most often 1 µF. Counted from the KiCad layouts of 14 open source designs using the MCP1824T-1202E/OT.
What decoupling capacitors do designs use on the MCP1824T-1202E/OT VOUT pin?
The VOUT pin has a decoupling capacitor on 14 of 14 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 14 open source designs using the MCP1824T-1202E/OT.
How is the MCP1824T-1202E/OT EN pin connected?
The EN pin is tied to 5V on 14 of 14 designs. Counted from the KiCad layouts of 14 open source designs using the MCP1824T-1202E/OT.
What parts are used alongside the MCP1824T-1202E/OT?
The 25MHZ, SN74AVC4T774, TPS546D24ARVFR, ESP32-S3-WROOM-1 and MCP1824T-0802E appear in the most repositories here.
Which microcontrollers do boards using the MCP1824T-1202E/OT use?
Most are built on ESP32 (12) and RP2040/RP2350 (2).
How big is a typical board using the MCP1824T-1202E/OT?
The median is 56.5 × 99.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the MCP1824T-1202E/OT?
By GitHub stars, BitaxeGamma by bitaxeorg, with 430 stars.
Can I simulate one of these boards using the MCP1824T-1202E/OT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.