11 open source boards using the TPS613222ADBVR
Real designs built with the TPS613222ADBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
KeyGridBadge
dczia
79.1 × 129 mm94 parts2LUnlicense22STM32
Graphics card rev-2
ShaneTWilliams
72.9 × 61.3 mm113 parts4LMIT18STM32
Open running watch hw
fuad1502
41 × 61.9 mm208 parts4LNo license5ESP32
Esphome rgbcct led controller
mikelawrence
100 × 45 mm82 parts6LCERN-OHL-P-2.01EEE3088F project group 59
Khahulesingo144
80 × 55 mm55 parts2LNo license1LoRa Pinze Sent
ISS-Lab-Unibo
107 × 51 mm212 parts6LNo license0ESP32
OLD ENGG3800-g15
JoshCrouch
127.2 × 117 mm205 parts2LNo license0ESP32
Policyatdc33
mosfet0
90.4 × 89.6 mm64 parts2LGPL-3.00ESP32
Esphome fan controller
mikelawrence
25 × 42.5 mm48 parts2LCERN-OHL-P-2.00ESP32
Stencil
mikelawrence
100 × 45 mm82 parts6LCERN-OHL-P-2.01ESP32
ENGG3800-g15
JoshCrouch
101.9 × 109.5 mm182 parts2LNo license0
How designs wire the TPS613222ADBVR
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TPS613222ADBVR connects to, and the resistors, capacitors and other passives placed on it.
- The SW pin has a inductor on 8 of 8 designs, most often 2.2 µH (then 1 µH).
- The VOUT pin has a decoupling capacitor on 8 of 8 designs, most often 22 µF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SWpin 1 | Connected to: Signal 63% · 5V 38% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| NCpin 3, 5 | Connected to: Not connected 88% | — |
| VOUTpin 4 | Connected to: 5V 75% · a signal 25% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include KeyGridBadge by dczia, Open running watch hw by fuad1502, EEE3088F project group 59 by Khahulesingo144 and Esphome rgbcct led controller by mikelawrence.
The TPS613222ADBVR in open source designs
The gallery holds 11 open source boards using the TPS613222ADBVR from 9 GitHub repositories; a typical one measures about 90.3 × 61.3 mm and carries around 94 components.
55% are two-layer designs, the rest use four layers or more, and 55% carry an open source license.
The most starred is KeyGridBadge by dczia.
Parts used alongside the TPS613222ADBVR
What boards using the TPS613222ADBVR are built for
TPS613222ADBVR: common questions
Where can I find a TPS613222ADBVR reference design?
Each of the 11 boards on this page is a real design using the TPS613222ADBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS613222ADBVR SW pin connected?
The SW pin has a inductor on 8 of 8 designs, most often 2.2 µH (then 1 µH). Counted from the KiCad layouts of 8 open source designs using the TPS613222ADBVR.
What decoupling capacitors do designs use on the TPS613222ADBVR VOUT pin?
The VOUT pin has a decoupling capacitor on 8 of 8 designs, most often 22 µF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the TPS613222ADBVR.
What parts are used alongside the TPS613222ADBVR?
The ESP32-C3-MINI-1-N4X, MPM3506AGQV-P and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the TPS613222ADBVR use?
Most are built on ESP32 (7) and STM32 (2).
How big is a typical board using the TPS613222ADBVR?
The median is 90.3 × 61.3 mm, and 55% are two-layer designs.
What is the most popular open source board using the TPS613222ADBVR?
By GitHub stars, KeyGridBadge by dczia, with 22 stars.
Can I simulate one of these boards using the TPS613222ADBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.