8 open source boards using the STM32G474CETx
Real designs built with the STM32G474CETx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Zellia80-HE
mhdimo
344 × 117.5 mm479 parts4LLGPL-2.124STM32
Bmcv
Bemeier
80 × 108 mm370 parts4LCC-BY-SA-4.07STM32
P1 tx
Deco025
82 × 60 mm88 parts4LCERN-OHL-S-2.04STM32
Zellia80-HE
Zellia-Keyboards
344 × 117.5 mm479 parts4LLGPL-2.11STM32
Tripod-Controller
GoTouchGra55
50.5 × 64 mm83 parts4LMIT1STM32
Hermod right
modern-hobbyist
3.6 × 3.3 mm212 parts2LMIT27STM32
Hermod left
modern-hobbyist
3.6 × 3.3 mm196 parts2LMIT27STM32
Modern lcd keyboard
modern-hobbyist
72 × 44.5 mm184 parts2LMIT27
How designs wire the STM32G474CETx
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the STM32G474CETx connects to, and the resistors, capacitors and other passives placed on it.
- The VBAT pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
- The VREF+ pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
- The VDDA pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
- The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 100% |
|
| PC13pin 2 | Connected to: Signal 67% · not connected 33% |
|
| PF0pin 5 | Connected to: Signal 83% · not connected 17% |
|
| PF1pin 6 | Connected to: Signal 83% · not connected 17% |
|
| PG10pin 7 | Connected to: A connector 50% |
|
| PA1pin 9 | Connected to: CD74HC4067SM 33% |
|
| PA4pin 12 | Connected to: Signal 83% · not connected 17% |
|
| VSSApin 19 | Connected to: GND 100% | — |
| VREF+pin 20 | Connected to: 3.3V 100% |
|
| VDDApin 21 | Connected to: 3.3V 100% |
|
| PB10pin 22 | Connected to: Not connected 67% · a signal 33% | — |
| VSSpin 23, 35, 47 | Connected to: GND 100% | — |
| VDDpin 24, 36, 48 | Connected to: 3.3V 100% |
|
| PA11pin 33 | Connected to: A connector 50% |
|
| PA12pin 34 | Connected to: A connector 50% · not connected 17% |
|
| PA15pin 39 | Connected to: Not connected 67% · a signal 33% | — |
| PB6pin 43 | Connected to: W25Q16JVSS 33% |
|
| PB8pin 45 | Connected to: Signal 100% |
|
| PB9pin 46 | Connected to: Not connected 67% · a signal 33% | — |
25 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hermod left by modern-hobbyist, Zellia80-HE by mhdimo, Bmcv by Bemeier and P1 tx by Deco025.
The STM32G474CETx in open source designs
The gallery holds 8 open source boards using the STM32G474CETx from 6 GitHub repositories; a typical one measures about 76 × 62 mm and carries around 204 components.
63% use four copper layers or more, and 100% carry an open source license.
The most starred is Hermod right by modern-hobbyist.
Parts used alongside the STM32G474CETx
Microcontrollers on boards using the STM32G474CETx
What boards using the STM32G474CETx are built for
STM32G474CETx: common questions
Where can I find a STM32G474CETx reference design?
Each of the 8 boards on this page is a real design using the STM32G474CETx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32G474CETx VBAT pin?
The VBAT pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the STM32G474CETx.
What decoupling capacitors do designs use on the STM32G474CETx VREF+ pin?
The VREF+ pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the STM32G474CETx.
What decoupling capacitors do designs use on the STM32G474CETx VDDA pin?
The VDDA pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the STM32G474CETx.
What parts are used alongside the STM32G474CETx?
The CD74HC4067SM, SLSS49E-3, TPS63001 and W25Q16JVSS appear in the most repositories here.
Which microcontrollers do boards using the STM32G474CETx use?
Most are built on STM32 (8).
How big is a typical board using the STM32G474CETx?
The median is 76 × 62 mm, and 38% are two-layer designs.
What is the most popular open source board using the STM32G474CETx?
By GitHub stars, Hermod right by modern-hobbyist, with 27 stars.
Can I simulate one of these boards using the STM32G474CETx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.