Hardware
nguyenmihn·IoT-LoRaGateway-and-IoT-LoRaNodes·hardware/hardware.kicad_pcb
About the Hardware PCB
Hardware is an open source ESP32 PCB design by nguyenmihn, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 116.2 × 69.6 mm, with 163 components from 83 distinct parts.
Its main chip is the ESP32-WROOM-32UE, from the ESP32 family. Other key parts include the TPS62840DLCR, BQ24075RGT, MT3608, XL1509 and ADS1115IDGS. By type, the board carries 56 resistors, 52 capacitors, 14 ICs, 9 transistors, 6 connectors and 6 diodes.
It belongs with the iot & wireless, sensors and rf & radio designs in this gallery.
From the project
Design and implementation of IoT-LoRaGateway and IoT-LoRaNodes applied in a building safety monitoring system (sponsored by ICE Meca Tech, Korea & IoTVision)
PSMS is an embedded IoT project integrating hardware design, firmware, and LoRa/TCP-IP communication to monitor and detect fire risks inside electrical panels.
- Goal: Detect early signs of sparks, smoke, and temperature anomalies in panels. - Use cases: Industrial installations like thermal power plants. - Communication: LoRa for remote, low-power detection; TCP-IP as wired fallback.
Main components on the Hardware
Hardware bill of materials (BOM)
163 components, 83 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS62840DLCR | VSON-HR - 1 mm | U1 |
| 1 | BQ24075RGT | VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm_ThermalVias | U2 |
| 1 | MT3608 | SOT-23-6 | U3 |
| 1 | XL1509 | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | ESP32-WROOM-32UE | ESP32-WROOM-32E | U5 |
| 1 | ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U6 |
| 1 | AI-THINKER-RA-02 Ai-Thinker-Ra-02 | MODULE_RA-02_LORA | U7 |
| 1 | Ipex | Connector_Coaxial_SMA | U8 |
| 2 | LM393D | SOIC127P599X175-8N | U9, U11 |
| 1 | MQ-6 | MQ-6 | U10 |
| 1 | W5500 | LQFP-48_7x7mm_P0.5mm | U12 |
| 1 | MLX90614ESF-BAA-000-TU | TO254P942H425-4 | U13 |
| 1 | MAX6675ISA_ | SOIC127P600X175-8N | U15 |
| 3 | SI2300 | SOT23-3 | Q1, Q3, Q5 |
| 3 | SI2301 | SOT23-3 | Q2, Q4, Q6 |
| 2 | SI2300 | SOT23-3 | Q7, Q8 |
| 1 | BPW85A | XDCR_BPW85A | Q9 |
| 1 | Crystal_MCU | Crystal_3225_4P_3.2x2.6mm | Y1 |
| 1 | Jack-DC | BarrelJack_Wuerth_6941xx301002 | J1 |
| 1 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | KF-5.08-2P | J2 |
Show 63 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_01X06_MALE Conn_01x06_Male | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 2 | Screw_Terminal_01x02 | KF-5.08-2P | J4, J5 |
| 1 | RJ45_HANRUN_HR911105A_HORIZONTAL RJ45_Hanrun_HR911105A_Horizontal | RJ45_Hanrun_HR911105A_Horizontal | J6 |
| 1 | BATTERY_18650 Battery_18650 | XH 2.54 2Pin Female | BT1 |
| 1 | 1A | F_1812 | F1 |
| 1 | SOLDERJUMPER_2_OPEN SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | 07D330K | RV_Disc_D12mm_W4.2mm_P7.5mm | RV1 |
| 1 | 100K | Potentiometer_Bourns_TC33X_Vertical | RV2 |
| 1 | MSK-38/SS-12D00 | SW_MSK-38 | SW1 |
| 1 | SW_Push | SW_SPST_B3U-1000P | SW2 |
| 1 | SW_Push | SW_6x6_90DEG | SW3 |
| 2 | 10k | TRIM_3362P-1-103 | VR1, VR2 |
| 1 | 3V3 | D_SOD-123 | Z1 |
| 1 | 12V | D_SOD-123 | Z2 |
| 2 | 3V6 | D_SOD-123 | Z3, Z4 |
| 1 | LED_Dual_AKAK | LED_Housing_Dual | D1 |
| 2 | SS34 | D_SMA | D2, D3 |
| 3 | LED | LED_0603_1608Metric | D5, D6, D9 |
| 1 | FerriteBead | R_0805_2012Metric | FB1 |
| 1 | VHF160808H2N2ST | L_0603_1608Metric | L1 |
| 1 | 22UH 22uH | L_Bourns_SRN6045TA | L2 |
| 1 | 2.2UH 2.2uH | L_Bourns_SRN6045TA | L3 |
| 1 | 47UH 47uH | L_7.3x7.3_H4.5 | L4 |
| 7 | 10UF 10uF | C_0603 | C1, C9, C10, C11, C12, C16, C18 |
| 5 | 100NF 100nF | C_0603 | C2, C13, C17, C19, C23 |
| 7 | 1UF 1uF | C_0603 | C3, C4, C6, C7, C8, C15, C21 |
| 1 | 220uF 35V | CP_Elec_8x10.5 | C5 |
| 1 | 110uF 10V | CP_Elec_6.3x5.4 | C14 |
| 3 | 100nF | C_0603 | C20, C22, C24 |
| 3 | 100n | C_0603 | C25, C42, C44 |
| 3 | 104 | C_0603 | C26, C27, C32 |
| 1 | 105 | C_0603 | C28 |
| 2 | 18P 18p | C_0603 | C29, C30 |
| 1 | 0.1UF 0.1uF | C_0603 | C31 |
| 1 | 1NF/2KV 1nF/2kV | C_Disc_D10.0mm_W2.5mm_P5.00mm | C33 |
| 1 | 22NF 22nF | C_0603 | C34 |
| 2 | 6.8NF 6.8nF | C_0805 | C35, C38 |
| 2 | 0.1u | C_0603 | C36, C43 |
| 1 | 1u | C_0603 | C37 |
| 2 | 10NF 10nF | C_0603 | C39, C40 |
| 1 | 4.7UF 4.7uF | C_0603 | C41 |
| 6 | 0.1UF 0.1uF | C_0805 | C45, C46, C47, C48, C49, C50 |
| 2 | 10 uF 16V | CP_EIA-3216-10_Kemet-I | C51, C52 |
| 9 | 1k | R_0603 | R1, R6, R13, R14, R41, R42, R43, R44 +1 |
| 4 | 10K | R_0603 | R2, R12, R17, R18 |
| 1 | 12K 12k | R_0603 | R3 |
| 1 | 270K | R_0603 | R4 |
| 2 | 1K2 | R_0603 | R5, R9 |
| 3 | 100K | R_0603 | R7, R11, R23 |
| 3 | 20K | R_0603 | R8, R15, R24 |
| 1 | 220K | R_0603 | R10 |
| 1 | 2K7 | R_0603 | R16 |
| 8 | 4K7 | R_0603 | R19, R20, R21, R22, R29, R30, R31, R32 |
| 2 | 22K | R_0805_2012Metric | R25, R27 |
| 3 | 10k | R_0603 | R26, R28, R40 |
| 3 | 100R | R_0603 | R33, R34, R35 |
| 2 | 1M | R_0603 | R36, R39 |
| 5 | 0R | R_0603 | R37, R38, R45, R52, R53 |
| 2 | 330R | R_0603 | R46, R47 |
| 2 | 49R9 | R_0603 | R48, R50 |
| 1 | 10R | R_0805 | R51 |
| 2 | 82R 1% | R_0805 | R54, R55 |
| 1 | 12.4K 12.4k | R_0603 | R56 |
Hardware design files
The KiCad project lives in the nguyenmihn/IoT-LoRaGateway-and-IoT-LoRaNodes repository on GitHub; these links point at the commit this page was built from.
Hardware: common questions
What microcontroller does the Hardware use?
The Hardware is built around the ESP32-WROOM-32UE, from the ESP32 family.
How big is the Hardware PCB?
The Hardware measures 116.2 × 69.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hardware?
163 components, from 83 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hardware design files?
From the nguyenmihn/IoT-LoRaGateway-and-IoT-LoRaNodes repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hardware design in my own project?
Yes, under the terms of its Apache-2.0 license, which nguyenmihn chose for the repository.
Can I test firmware for the Hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in IoT-LoRaGateway-and-IoT-LoRaNodes
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k