Messenger

nickzentmayer·Messenger·pcb/messenger/messenger.kicad_pcb

Messenger PCB layout, top view — open source ESP32 board by nickzentmayer

About the Messenger PCB

Messenger is an open source ESP32 PCB design by nickzentmayer, published on GitHub. It is a 4-layer board measuring 68 × 73.5 mm, with 89 components from 55 distinct parts.

Its main chip is the ESP32-S3, from the ESP32 family. Other key parts include the DMG3415U-7, SX1262IMLTRT, USBLC6-2SC6, MCP73831-2-OT and NCP186AMX330TAG. By type, the board carries 31 capacitors, 21 resistors, 17 ICs, 6 inductors, 5 connectors and 2 switches.

It belongs with the rf & radio designs in this gallery.

From the project

This is a repository of hardware and software for a SX1262 radio based messageing device I made. This device supports a messaging protocol named Hermes that I created with insperation from protocols like TCP. This messenger runs on an ESP32-S3 using the Arduino framework. All cod

This is a repository of hardware and software for a SX1262 radio based messageing device I made. This device supports a messaging protocol named Hermes that I created with insperation from protocols like TCP. This messenger runs on an ESP32-S3 using the Arduino framework. All code is built and compiled using Platformio. All hardware is managed through heavy use of FreeRTOS tasks. This allows for easy programming and ensures all hardware is utilized in a timely manner.

Main components on the Messenger

Messenger bill of materials (BOM)

89 components, 55 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
DMG3415U-7
U1, U8, U9
1
ESP32-S3
U2
1
SX1262IMLTRT
U3
1
USBLC6-2SC6
U4
1
MCP73831-2-OT
U5
2
NCP186AMX330TAG
U6, U19
1
W25Q128JVS
U10
1
~
U11
1
BBQ10KBD
U12
1
TCA8418RTWR
U13
1
24AA32AF-I/MS
24AA32AF-I_MS
U14
1
~
U16
1
MAX17049G+T10
U17
1
PE4259
U18
1
32.0MHz
Q1_Xtal1
1
40MHZ
40MHz
X1
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
Battery
J2
1
Conn_Coaxial
J3
1
Display Connector
J4
Show 35 more
QtyPartRefs
1
Conn_Coaxial
J5
1
~
ATGM336H1
1
MS421R
BT1
1
0900FM15K0039
FL1
1
BOOT
SW1
1
EN
SW2
1
MBR0540
D1
1
MCL4148
D2
1
22NH
22nH
L2
1
2.4NH
2.4nH
L3
2
47NH
47nH
L4, L6
1
15UH
15uH
L5
1
2.0NH
2.0nH
L7
7
1UF
1uF
C1, C2, C3, C6, C21, C29, C32
1
10NF
10nF
C4
2
10UF
10uF
C5, C19
7
100NF
100nF
C7, C8, C9, C12, C18, C20, C31
2
100NF
100nF
C10, C17
1
1UF
1uF
C11
2
12PF
12pF
C13, C14
2
1.8PF
1.8pF
C15, C16
1
47NF
47nF
C22
1
470NF
470nF
C23
1
47PF
47pF
C24
2
1NF
1nF
C25, C26
1
39PF
39pF
C27
1
10PF
10pF
C28
2
10
R1, R21
4
5.1K
5.1k
R2, R3, R19, R20
8
10K
10k
R4, R7, R9, R10, R11, R13, R15, R18
2
2k
R5, R14
1
100K
100k
R6
1
2k
R12
2
100R
R16, R22
1
220R
R17

Messenger design files

The KiCad project lives in the nickzentmayer/Messenger repository on GitHub; these links point at the commit this page was built from.

Messenger: common questions

What microcontroller does the Messenger use?

The Messenger is built around the ESP32-S3, from the ESP32 family.

How big is the Messenger PCB?

The Messenger measures 68 × 73.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Messenger?

89 components, from 55 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Messenger design files?

From the nickzentmayer/Messenger repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Messenger design in my own project?

The repository has no license, so all rights stay with nickzentmayer. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Messenger without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards