HardLabs

AS3397 eurorack 0603

PhysicsDptAngers·polyUAnalog·hardware/voice/eurorack-smd-0603/AS3397_eurorack_0603.kicad_pcb

AS3397 eurorack 0603 PCB layout, top view — open source RP2040/RP2350 board by PhysicsDptAngers
Simulate this board

About the AS3397 eurorack 0603 PCB

AS3397 eurorack 0603 is an open source RP2040/RP2350 PCB design by PhysicsDptAngers, published on GitHub under the MIT license. It is a 2-layer board measuring 92.2 × 64.2 mm, with 110 components from 42 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the MCP6002 and 74HC4050. By type, the board carries 49 resistors, 39 capacitors, 7 ICs, 5 transistors, 3 connectors and 3 test points.

It belongs with the audio designs in this gallery.

From the project

Open source, analog and polyphonic synthesizer

These PCBs allow the generation of one analog audio voice using the AS3397 chip, controlled by an RP2040/RP2530 (Raspberry Pi Pico) microcontroller.

We offer three different circuit designs:

- Main (SMD 1206): This is the reference board, designed to be controlled by the conductor board along with other voice boards to form a polyphonic synthesizer. It uses relatively large SMD 1206 (Surface-Mounted) components, which can be soldered by hand with some practice.

Main components on the AS3397 eurorack 0603

MCP6002Pico74HC4050

AS3397 eurorack 0603 bill of materials (BOM)

110 components, 42 distinct parts.

QtyPartRefs
5
MCP6002
U1, U3, U4, U5, U7
1
Pico
U2
1
74HC4050
U6
5
BS170F
Q1, Q2, Q3, Q4, Q5
1
Conn_01x04_Socket_I2C
J1
1
Conn_01x03_Socket_Audio
J2
1
Conn_01x04_Socket_POWER
J4
1
AS3397
AS1
1
CTA
TP1
1
CTB
TP2
1
GND
TP3
3
1N4148
D1, D2, D3
1
2.2nF
C1
12
100nF
C2, C4, C15, C16, C17, C18, C19, C21 +4
4
10uF
C3, C37, C38, C39
3
33nF
C5, C6, C8
2
3.3nF
C7, C12
8
22nF
C9, C20, C24, C25, C26, C27, C35, C36
1
470pF
C10
1
1uF
C11
Show 22 more
QtyPartRefs
2
120pF
C13, C14
2
1.5nF
C22, C23
3
10uF
C30, C33, C34
3
3k9
R1, R3, R13
3
1M
R2, R4, R14
1
4.7k
R5
1
47k
R6
15
10k
R7, R10, R24, R28, R31, R32, R33, R34 +7
2
4k7
R8, R9
2
6.8k
R11, R29
3
1k
R12, R27, R30
2
422k
R15, R22
2
100k
R16, R17
4
3.6k
R18, R25, R35, R37
1
68k
R19
1
27k
R20
3
33k
R21, R23, R26
2
1.2k
R36, R38
1
22k
R41
1
470
R42
1
28k
R45
1
680
R46

AS3397 eurorack 0603 design files

The KiCad project lives in the PhysicsDptAngers/polyUAnalog repository on GitHub; these links point at the commit this page was built from.

AS3397 eurorack 0603: common questions

What microcontroller does the AS3397 eurorack 0603 use?

The AS3397 eurorack 0603 is built around the Pico, from the RP2040/RP2350 family.

How big is the AS3397 eurorack 0603 PCB?

The AS3397 eurorack 0603 measures 92.2 × 64.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AS3397 eurorack 0603?

110 components, from 42 distinct parts. The full bill of materials is listed on this page.

Where can I download the AS3397 eurorack 0603 design files?

From the PhysicsDptAngers/polyUAnalog repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the AS3397 eurorack 0603 design in my own project?

Yes, under the terms of its MIT license, which PhysicsDptAngers chose for the repository.

Can I test firmware for the AS3397 eurorack 0603 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in polyUAnalog

Similar boards