11 open source boards using the L79L05_SO8
Real designs built with the L79L05_SO8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Polykit X1 Monosynth
polykit
200 × 100 mm147 parts2LNo license89Panning Mixer
powsplatboom
243.8 × 100 mm633 parts4LNo license11Polykit X1 Monosynth
sinitsinmike
200 × 100 mm147 parts2LNo license1Narcotic VCO
SPCMSK
78 × 128.5 mm95 parts2LNo license0Spring Reverb
powsplatboom
170 × 100 mm313 parts4LNo license11Austral VCO
SPCMSK
56 × 115.1 mm87 parts2LNo license0Utility board
powsplatboom
399.8 × 72 mm242 parts2LNo license11AVR/Arduino
SSI2130 Oscillator
powsplatboom
84 × 100 mm185 parts4LNo license11STM32
Power SMPS
Synthron
160 × 100 mm112 parts2LNo license3Stereo Mixer
powsplatboom
120 × 100 mm121 parts2LNo license11STM32
Electronic Load
Synthron
160 × 100 mm102 parts4LNo license3
How designs wire the L79L05_SO8
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the L79L05_SO8 connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin is tied to -5V on 4 of 5 designs.
- The IN pins is tied to -12V on 80% of them (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: -5V 80% · a signal 20% | — |
| INpin 2, 3, 6, 7 | Connected to: -12V 80% · a signal 15% | — |
| NCpin 4, 8 | Connected to: Not connected 80% | — |
| GNDpin 5 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Polykit X1 Monosynth by polykit, Panning Mixer by powsplatboom, Electronic Load by Synthron and Polykit X1 Monosynth by sinitsinmike.
The L79L05_SO8 in open source designs
The gallery holds 11 open source boards using the L79L05_SO8 from 5 GitHub repositories; a typical one measures about 160 × 100 mm and carries around 147 components.
64% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Polykit X1 Monosynth by polykit.
Parts used alongside the L79L05_SO8
Microcontrollers on boards using the L79L05_SO8
What boards using the L79L05_SO8 are built for
L79L05_SO8: common questions
Where can I find a L79L05_SO8 reference design?
Each of the 11 boards on this page is a real design using the L79L05_SO8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the L79L05_SO8 OUT pin connected?
The OUT pin is tied to -5V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the L79L05_SO8.
How is the L79L05_SO8 IN pin connected?
The IN pins is tied to -12V on 80% of them (a signal on 3). Counted from the KiCad layouts of 5 open source designs using the L79L05_SO8.
What parts are used alongside the L79L05_SO8?
The L78L05_SO8, TL072, TL074, MC78M12_TO252 and MC79M12_TO252 appear in the most repositories here.
Which microcontrollers do boards using the L79L05_SO8 use?
Most are built on STM32 (2) and AVR/Arduino (1).
How big is a typical board using the L79L05_SO8?
The median is 160 × 100 mm, and 64% are two-layer designs.
What is the most popular open source board using the L79L05_SO8?
By GitHub stars, Polykit X1 Monosynth by polykit, with 89 stars.
Can I simulate one of these boards using the L79L05_SO8 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.