7 open source boards using the AS3360
Real designs built with the AS3360, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Panning Mixer
powsplatboom
243.8 × 100 mm633 parts4LNo license11Eurorack-VCO-Module
d65134034-design
50.5 × 110 mm4 parts2LMIT0Dual vca kosmo
Krakenpine
100 × 200 mm72 parts2LNo license22Utility board
powsplatboom
399.8 × 72 mm242 parts2LNo license11Raspberry Pi
Zoxnoxious Backplane and VCA
brer-rabbit
133.8 × 102.9 mm86 parts4LGPL-3.068VCA Panner
mort13
43 × 110 mm79 parts2LGPL-3.012Synth
adeboni
50.5 × 100 mm108 parts4LGPL-3.00
How designs wire the AS3360
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the AS3360 connects to, and the resistors, capacitors and other passives placed on it.
- The VO1 pin is left unconnected on 5 of 5 designs.
- The VO2 pin is left unconnected on 5 of 5 designs.
- The IO1 pin has a series resistor on 4 of 5 designs, most often 100 kΩ (then 47 kΩ).
- The II1 pin has a series resistor on 4 of 5 designs, most often 47 kΩ (then 100 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| IO1pin 2 | Connected to: TL074 40% |
|
| VE1pin 3 | Connected to: Not connected 80% · a signal 20% | — |
| VO1pin 4 | Connected to: Not connected 100% | — |
| VC1pin 5 | Connected to: Signal 80% · not connected 20% |
|
| II1pin 6 | Connected to: Signal 100% |
|
| VEEpin 7 | Connected to: -12V 100% |
|
| VREFpin 8 | Connected to: Signal 80% · not connected 20% |
|
| II2pin 9 | Connected to: Signal 100% |
|
| VC2pin 10 | Connected to: Signal 80% · not connected 20% |
|
| VO2pin 11 | Connected to: Not connected 100% | — |
| VE2pin 12 | Connected to: Not connected 80% · a signal 20% | — |
| IO2pin 13 | Connected to: TL074 40% · not connected 20% |
|
| VCCpin 14 | Connected to: 12V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Zoxnoxious Backplane and VCA by brer-rabbit, Dual vca kosmo by Krakenpine, VCA Panner by mort13 and Panning Mixer by powsplatboom.
The AS3360 in open source designs
The gallery holds 7 open source boards using the AS3360 from 6 GitHub repositories; a typical one measures about 100 × 102.9 mm and carries around 86 components.
57% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.
The most starred is Zoxnoxious Backplane and VCA by brer-rabbit.
Microcontrollers on boards using the AS3360
What boards using the AS3360 are built for
AS3360: common questions
Where can I find a AS3360 reference design?
Each of the 7 boards on this page is a real design using the AS3360. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AS3360 VO1 pin connected?
The VO1 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the AS3360.
How is the AS3360 VO2 pin connected?
The VO2 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the AS3360.
What resistor goes on the AS3360 IO1 pin?
The IO1 pin has a series resistor on 4 of 5 designs, most often 100 kΩ (then 47 kΩ). Counted from the KiCad layouts of 5 open source designs using the AS3360.
What parts are used alongside the AS3360?
The TL074, AS3340 and TL072 appear in the most repositories here.
Which microcontrollers do boards using the AS3360 use?
Most are built on Raspberry Pi (1).
How big is a typical board using the AS3360?
The median is 100 × 102.9 mm, and 57% are two-layer designs.
What is the most popular open source board using the AS3360?
By GitHub stars, Zoxnoxious Backplane and VCA by brer-rabbit, with 68 stars.
Can I simulate one of these boards using the AS3360 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.