18 open source boards using the L78L05_SO8
Real designs built with the L78L05_SO8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Polykit X1 Monosynth
polykit
200 × 100 mm147 parts2LNo license89BSPD
SDU-Vikings
100 × 50 mm84 parts2LCC0-1.030Panning Mixer
powsplatboom
243.8 × 100 mm633 parts4LNo license11Edm power board
strombom
240 × 80 mm150 parts4LNo license7STM32
PayloadPrototypeBoard2021
Case-Rocket-Team
51.8 × 41.7 mm71 parts2LNo license2Polykit X1 Monosynth
sinitsinmike
200 × 100 mm147 parts2LNo license1AVR/Arduino
StepperMotorControllerBoard
Case-Rocket-Team
39 × 39.4 mm37 parts2LNo license1Adjustable-DC-DC-Buck-Converter
bharat-ops77
72 × 73.5 mm29 parts2LGPL-3.00Ometak
matuhac
60 × 41 mm25 parts2LNo license0Raspberry Pi
Terraskipper
ZIZO932
73 × 108 mm13 parts2LNo license0ESP32
Pendulo invertido
ivansanchezsuarez
74.7 × 68.6 mm10 parts2LNo license0CurrentControl
EliMattingly22
97.5 × 75 mm59 parts2LMIT13Spring Reverb
powsplatboom
170 × 100 mm313 parts4LNo license11STM32
LimiterBoard
nietamten
40.1 × 38.3 mm45 parts2LNo license4Utility board
powsplatboom
399.8 × 72 mm242 parts2LNo license11High Torque Servo Arm: Microservo
akornsys-rdi
44 × 46 mm26 parts2LGPL-3.00AVR/Arduino
SSI2130 Oscillator
powsplatboom
84 × 100 mm185 parts4LNo license11Stereo Mixer
powsplatboom
120 × 100 mm121 parts2LNo license11
How designs wire the L78L05_SO8
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the L78L05_SO8 connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin is tied to 5V on 9 of 14 designs (a signal on 5).
- The IN pin is tied to 12V on 9 of 13 designs (a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: 5V 64% · a signal 36% | — |
| GNDpin 2, 3, 6, 7 | Connected to: GND 85% · a signal 15% | — |
| NCpin 4, 5 | Connected to: Not connected 89% | — |
| INpin 8 | Connected to: 12V 69% · a signal 31% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Polykit X1 Monosynth by polykit, BSPD by SDU-Vikings, CurrentControlPCB by EliMattingly22 and Panning Mixer by powsplatboom.
The L78L05_SO8 in open source designs
The gallery holds 18 open source boards using the L78L05_SO8 from 14 GitHub repositories; a typical one measures about 90.8 × 74.3 mm and carries around 78 components.
78% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.
The most starred is Polykit X1 Monosynth by polykit.
Parts used alongside the L78L05_SO8
Microcontrollers on boards using the L78L05_SO8
What boards using the L78L05_SO8 are built for
L78L05_SO8: common questions
Where can I find a L78L05_SO8 reference design?
Each of the 18 boards on this page is a real design using the L78L05_SO8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the L78L05_SO8 OUT pin connected?
The OUT pin is tied to 5V on 9 of 14 designs (a signal on 5). Counted from the KiCad layouts of 14 open source designs using the L78L05_SO8.
How is the L78L05_SO8 IN pin connected?
The IN pin is tied to 12V on 9 of 13 designs (a signal on 4). Counted from the KiCad layouts of 14 open source designs using the L78L05_SO8.
What parts are used alongside the L78L05_SO8?
The TL072, L79L05_SO8, TL074, LM311 and LM358 appear in the most repositories here.
Which microcontrollers do boards using the L78L05_SO8 use?
Most are built on AVR/Arduino (2), STM32 (2), ESP32 (1) and Raspberry Pi (1).
How big is a typical board using the L78L05_SO8?
The median is 90.8 × 74.3 mm, and 78% are two-layer designs.
What is the most popular open source board using the L78L05_SO8?
By GitHub stars, Polykit X1 Monosynth by polykit, with 89 stars.
Can I simulate one of these boards using the L78L05_SO8 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.